Channel Preset Memory
Putting the channel in the memory.
1Select the preset band Press the [u] button.
2Select the channel to put in the memory Press the [4] or [¢] button.
3Put the channel in the memory
Press the [#1] — [#6] button for at least 2 seconds. The preset number display blinks 1 time.
On each band, 1 channel can be put in the memory on each [#1]
— [#6] button.
Only the channel number is stored. Category information is not stored.
Preset Tuning
Calling up the channels in the memory.
1Select the preset band Press the [u] button.
2Call up the channel
Press the [#1] — [#6] button.
Channel Scan
Scanning for the channel you want to listen to.
1Start Channel Scan
2Release it when the channel you want to listen to is received Press the [SEEK] button for at least 1 second.
Channel Search
You can switch from Up/Down of Channel in a category being selected to Previous/Next of Category that includes Channel being received and vice versa.
1Enter Channel Search mode Press the [SRCH] button.
2Select the Category
Press the [u] or [d] button.
3Select the Channel
Press the [4] or [¢] button.
Canceling Channel Search
Press the [SRCH] button.
You cannot operate this unit until all the Category information is acquired.
Press the [SEEK] button for at least 1 second. "SCAN" indicator is ON.
— 7 —