SPRA921
3.5Cache Summary
The efficiency of the cache architecture makes the device simple to use. The cache is inherently transparent to the user. Due to the level of associativity and the high cache hit rate, virtually no optimization must be done to achieve high performance. Reduced time for optimization leads to reduced development time, allowing functional systems to be up and running quickly. High performance can be immediately achieved with the cache architecture, while a Harvard architecture device with small internal memory requires much more time to achieve similar performance. This is because optimizing an application on a small Harvard architecture requires several iterations to tune the application to fit in the small, fixed internal memories.
4 McASP
4.1McASP Overview
The McASP is a serial port optimized for the needs of multichannel audio applications. With two McASP peripherals, the TMS320C6713 device is capable of supporting two completely independent audio zones simultaneously.
Each McASP consists of a transmit and receive section. These sections can operate completely independently with different data formats, separate master clocks, bit clocks, and frame syncs or alternatively, the transmit and receive sections may be synchronized. Each McASP module also includes a pool of 16 shift registers that may be configured to operate as either transmit data, receive data, or
The transmit section of the McASP can transmit data in either a
Each McASP can support one transmit data format (either a TDM format or DIT format) and one receive format at a time. All transmit shift registers use the same format and all receive shift registers use the same format. However, the transmit and receive formats need not be the same.
The McASP has additional capability for flexible clock generation, and error detection/handling, as well as error management.
4.2TDM Synchronous Transfer Mode
The McASP supports a multichannel,
TDM synchronous transfer mode is typically used when communicating between integrated circuits such as between a DSP and one or more ADC, DAC, CODEC, or S/PDIF receiver devices. In multichannel applications, it is typical to find several devices operating synchronized with each other. For example, to provide six analog outputs, three stereo DAC devices would be driven with the same bit clock and frame sync, but each stereo DAC would use a different McASP serial data pin carrying stereo data (2 TDM time slots, left and right).
8TMS320C6713 Digital Signal Processor Optimized for High Performance Multichannel Audio Systems