![](/images/new-backgrounds/1128945/12894567x1.webp)
Manually install channels
This section describes how to search and store analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system settings are correct.
1Press .
2Select [Setup] > [Channel settings] > [Channel installation] > [Analogue: Manual antenna installation] > [System], then press OK.
3Select the correct system for your country or region, then press OK.
Step 2 Search and store new TV channels
1Press .
2Select [Setup] > [Channel settings] > [Channel installation] > [Analogue: Manual antenna installation] > *[Find channel], then press OK.
If you know the
To search, select [Search], then press OK.
3When the channel is found, select [Done], then press OK.
To store the channel as a new number, select [Store as new channel], then press OK.
To store the channel as the previously selected channel, select [Store current channel], then press OK.
Step 3 Fine-tune analogue channels
1 Press .
2Select [Setup] > [Channel settings] > [Channel installation] > [Analogue: manual install] >
3Press
Rename channels
You can rename channels.The name appears when you select the channel.
1While you watch TV, pressFIND.
» The channel matrix menu is displayed.
2Select the channel to rename.
3PressOPTIONS.
» The channel options menu appears.
4Select [Rename channel], then press OK. » A text input box appears.
5Press to select each character, then press OK.
6When the name is complete, select [Done], then press OK.
Tip
Press [Aa] to change an uppercase letter to a lowercase letter and vice versa.
32 EN
Downloaded From