Philips 42PDL7906T, 42PDL7906H, 42PDL7906K, 32PDL7906T, 32PDL7906K, 32PDL7906H View subtitles

Set the clock manually

If clock mode is set to [Manual], set the date and time manually.

1.In the [Clock] menu, select [Date] or [Time], then press OK.

2.Use the Navigation buttons to make your

selection.

3. Select [Done], then press OK.

Sleeptimer

Sleeptimer switches the TV to standby after a specified time. You can switch off your TV earlier or reset the sleeptimer during the countdown.

1.Press .

2.Select [Setup] > [TV settings] >

[Preferences] > [Sleeptimer].

3.Press the Navigation buttons to set the sleeptimer.

The sleeptimer can be set up to 180 minutes, in steps of five minutes. The sleeptimer is switched off if it is set to zero minutes.

4.Press OK to activate the sleep timer. The TV switches to standby after the specified time.

Child lock

To protect children from unsuitable TV programmes, you can lock the TV or block age rated programmes.

Set or change the child lock code

1.Press .

2.Select [Setup] > [Channel settings] >

[Child lock].

3.Select [Set code], or [Change code].

4.Enter the code with the Numeric buttons.

Tip: If you forget your code, enter '8888' to override any existing codes.

Lock or unlock channels

1.In the child lock menu, select [Channel lock].

2.Enter the child lock code with the Numeric buttons. The [Channel lock] menu appears.

3.Select channels to lock or unlock.

EN 30

Parental rating

Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings lower than your child's age.

1.Press .

2.Select [Setup] > [Channel settings] or

[Satellite settings].

3.Select [Child lock] > [Parental rating]. A message prompts you to enter the child lock code.

4.Enter the child lock code with the Numeric buttons.

5.Select an age rating, then press OK.

All programmes above the selected age rating are blocked.

For information on child lock codes, see Use more of your TV > Set locks and timers > Child lock (Page 30).

View subtitles

Analogue channels

1.Switch the TV to an analogue TV channel.

2.Press TEXT.

3.Enter the three-digit page number of the subtitles page (usually '888').

4.Press to exit teletext.

Subtitles display if available.

Digital channels

1.Press OPTIONS.

2.Select [Subtitles], then press OK.

3.Select [Subtitles off], [Subtitles on] or [On during mute], then press OK.

Note:

•If MHEG application is activated, subtitles are not displayed.

•If you select [On during mute], subtitles are displayed only when you press to mute the sound.