Philips 32PDL7906H Wireless connection, Most new wireless routers have the WPS, PIN code

Wireless connection

This TV is Wi-Fi integrated. You can connect the TV to your home network wirelessly. You can enjoy the best of the web from Net TV services, and sharing of content between your devices connected to the home network using Wi-Fi MediaConnect or DLNA, seamlessly and hassle free.

Note:

•The wireless network operates in the same 2.4GHz frequency spectrum as common household devices, such as Dect phones, microwave ovens or Bluetooth devices, which can cause Wi- Fi interferences. Move these devices away from the TV with the connected Wireless USB adapter.

•You should turn off any unused network equipment in the home network as this increases network traffic.

•Reception quality is dependent on the location of the wireless router, as well as the quality of services provided by the local Internet Service Provider.

•When playing video over your wireless home network, we recommend that you use an IEEE 802.11 N router. The connection speed may differ according to the operating environment of your wireless home network.

Start wireless setup

1.Switch on your wireless network router.

2.Press on the TV remote control.

3.Select [Setup] > [Connect to network]

and press OK.

4.Follow the on-screen instructions. WPS - Wi-Fi Protected Setup

If your router supports WPS (Wi-Fi Protected Setup), press the WPS button on the router. Return to the TV in 2 minutes, select [WPS] and press OK. The TV connects to your network. This takes about 2 minutes. Complete the installation.

Most new wireless routers have the WPS
system and carry the WPS logo. The WPS	English
system uses WPA security encryption and
cannot be combined with devices on your
network that use the WEP security
encryption. If you still need this WEP device
in your network, install with [Scan] >
[Custom].
Scan for routers
If you have several routers in your network,
you can select the network you need. To
select a specific network router, press
[Scan]on the first page of the installation.
The routers with WPS and the strongest
signal are shown first in the list on screen.
Select the router you need. If you are
connecting a WPS router, select [WPS] on
the TV.

•If you have set the PIN code in your router software, select [WPS pincode:] and enter the code.

•To enter the encryption key manually, select [Custom] and enter the key.

PIN code

To set the secured connection with a PIN code, select the PIN code and press OK. Write down the 8 digit PIN code shown on the TV and enter it in the router software on your PC. See the router manual for where to enter the PIN code.

Custom

To enter the encryption key (the security key) manually, select [Custom] and press OK. If you have WPA security on your router, enter the passphrase with the remote control.

To access the on-screen keyboard, select the text entry field and press OK. If you have WEP security encryption, the TV asks for the WEP encryption key in hexadecimal numbers.

EN 53