English
8 By using the arrow button or , choose whether
-the channels found are to be added to the old list (standard setting),
-the old channel list is to be overwritten,
-the new found channels are to be discarded.
9Then press the OK button.
Expert scan mode
This type of scan mode enables the specific search for an individual channel. This in particular makes sense if you only want to include one individual channel into your channel list and you know the information on the channel and frequency.
1Highlight the expert scan mode and press the OK but- ton.
2Successively select the adjustable values by using the
arrow button or .
- The desired frequency is set by the arrow button or .
-The frequency in MHz is entered via the numerical buttons of the remote control.
-The desired band width is set via the arrow buttons.
3Choose whether all channels or channels that are free-
4Then highlight OK and press the OK button to start the expert scan mode.
Following, the scan mode is started.
-If some channels were found, you receive the same request as with regard to the automatic scan mode, see previous paragraph.
-If no channels were found, a message is displayed. Press the OK button.
EPG
The electronic programme guide (EPG) offers you an overview of all programmes to be broadcasted in the next week on the current channel.
Observe:
-Not all channels offer an extensive EPG.
-Many broadcasting services broadcast the current day programme but do not offer detailed descriptions.
-There are broadcasting services that do not offer any EPG information.
-Due to the progressive technical development, more and more broadcasting services will extend this offer in the future.
1Select the desired channel.
2Press the EPG button to call up the electronic pro- gramme guide.
The following functions are offered to you by the EPG:
- If you require more information on a programme, high- light it by using the arrow button or , and press the INFO button.
-Change to the programme of another day by using the arrow button . By means of the arrow button
you can return.
-In order to switch between the programmes of the afternoon and evening, press the colour buttons dis- played in the EPG.
Note: Depending on the time of day, also "tomorrow" may be displayed.
-By pressing the channel + or - button, you can view the EPG of another channel.
-If you want to adopt a programme into the timer list, highlight it and press the TIMER/REC button. Acknowledge the following request by pressing the OK button.
Note: Detailed information on the subject "timer“ can be found in the next paragraph.
3Close the EPG by pressing the EXIT button .