TROUBLESHOOTING
PROBLEM |
| SOLUTION |
IR remote inoperative | • | Verify that the battery in the remote is fresh. |
| • Verify that the remote sensor eye is not | |
|
| obstructed. |
Disc won’t play | • | Insert a disc with the label side facing out. |
| • Check the type of disc you put into disc | |
|
| tray. This DVD only plays DVD, audio CD and |
|
| MP3s. |
| • Both the unit and the disc are coded by | |
|
| region. If the regional codes don’t match, the |
|
| disc can’t be played. |
Play starts, but then stops | • | The disc is dirty. Clean it. |
immediately | • | Condensation has formed. Allow player to |
|
| dry out |
No sound or distorted | • | Make sure your DVD is connected properly. |
sound |
| Make sure all cables are securely inserted |
|
| into the appropriate jacks. |
| • If you are using the | |
|
| headphones, make sure you turn on the IR |
|
| headphone power, make sure the correct |
|
| channel (A or B) is selected. |
| • If the FM Modulator is ON make sure proper | |
|
| frequency has been selected. |
Cannot advance through a | • | Most discs prohibit advancing through the |
movie |
| opening credits and warning information |
|
| that appear at the beginning of movies |
The icon ( ) appears on | • | The feature or action cannot be completed at |
screen |
| this time because: |
| 1. | The disc’s software restricts it. |
| 2. The disc’s software doesn’t support the | |
|
| feature (e.g., angles) |
| 3. The feature is not available at the moment. | |
| 4. A title or chapter number that is out of | |
|
| range has been requested. |
Picture is distorted | • | The disc might be damaged. Try another disc. |
| • It is normal for some distortion to appear | |
|
| during forward or reverse scan. |
25