Philips JENHR1D operation manual Headrest Cover Replacement, RED Wire

HEADREST COVER REPLACEMENT:

NOTE: Choose the best color match for your vehicle.

1.Lay the headrest on a flat surface, screen facing up. Using a Philips screwdriver, unscrew the two Philips screws and lift the bottom edge of the monitor up- ward.

Figure A

Unscrew Philips Screws

2.Carefully tilt the bottom edge of the DVD player upward and pull towards you to detach it from the top of the headrest.

3.Carefully unplug the wire from the back of the DVD player and set aside in a safe place.

4.Detach the velcro tabs securing the headrest cover and slip the cover off.

Detach Velcro Tabs Figure B

5.Replace the headrest cover with the desired color and secure the headrest cover by re-attaching the velcro tabs. Slide the posts through the rectangular cutouts first.

6.Carefully plug the harness back into the back of the DVD player.

Figure C

RED WIRE

5