Philips operating instructions Specifications, CQ-DFX972N45

Specifications

General		CD Player
Power Supply	: DC 12 V (11 V - 16 V), Test	Sampling Frequency	: 8 times oversampling
	Voltage 14.4 V, Negative	DA Converter	: MASH•1 bit/4 DAC System
	Ground	Error Correction System	: Panasonic Super Decoding
Current Consumption	: Less than 2.5 A (CD mode,		Algorithm
	0.5 W 4-Speaker)	Pick-Up Type	: Astigma 3-beam
Maximum Power Output	: 50 W x 4 (at 4 Ω)	Light Source	: Semiconductor laser
Power Output	: 22 W x 4 (DIN45 324, at 4 Ω)	Wavelength	: 780 nm
Speaker Impedance	: 4 - 8 Ω	Frequency Response	: 5 Hz - 20 kHz (±1 dB)
External Input Impedance	: 10 kΩ (AUX IN)	Signal to Noise Ratio	: 90 dB
External Input Sensitivity	: Max. 2 V (AUX IN)	Total Harmonic Distortion	: 0.01 % (1 kHz)
Pre-Amp Output Voltage	: 5 V (CD mode)	Wow and Flutter	: Below measurable limits
Pre-Amp Output Impedance	: 60 Ω	Channel Separation	: 70 dB
Sub-Woofer Output Voltage : 5 V
Dimensions	: 178 (W) x 50 (H) x 150 (D) mm	MP3 decoding	: MPEG 1 Audio Layer 3
Weight	: 1.6 kg	Bit Rate	MPEG 2 Audio Layer 3
FM Stereo Radio		(MPEG 1 Audio Layer 3)	: 32 kbps - 256 kbps,
Frequency Range	: 87.5 - 108 MHz		VBR (Variable Bit Rate)
Usable Sensitivity	: 7 dB/µV (S/N 30 dB)	(MPEG 2 Audio Layer 3)	: 16 kbps - 160 kbps,
Stereo Separation	: 35 dB (at 1 kHz)	Sampling Frequency	VBR (Variable Bit Rate)
MW Radio		(MPEG 1 Audio Layer 3)	: 32 kHz, 44.1 kHz, 48 kHz
Frequency Range	: 531 - 1,602 kHz	(MPEG 2 Audio Layer 3)	: 22.05 kHz, 24 kHz
Usable Sensitivity	: 29 dB/µV (S/N 20 dB)
LW Radio
Frequency Range	: 153 - 279 kHz
Usable Sensitivity	: 34 dB/µV (S/N 20 dB)

Note: Specifications and design are subject to modification without notice due to improvements.

E

N

G

L

I

S

H

42

CQ-DFX972N45