Philips CED1900BT user manual Get started, Prepare the remote control, Turn on

Page 14

4 Get started

Caution

•• Risk of car accidents! Never watch video or operate this system while driving.

Prepare the remote control

For the first time use

Pull the protective sheet out.

»»The remote control is ready for use.

Replace the battery

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

Note

•• Remove the battery if it is exhausted or if the remote control is not to be used for a long time.

•• Batteries contain chemical substances, they should be disposed of properly.

•• Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

1 Pull out the battery tray.

2 Insert one CR2025 battery with correct polarity (+/-) as indicated.

3 Insert the battery tray.

Turn on

Press .

»»PHILIPS logo and a progress bar are displayed while boot-up.

To turn off the system, press and hold for 3 seconds.

For the fist time use

After successful boot-up, the following interface is displayed.

1 Tap to select a language for on-screen display.

»»The following interface is displayed.

12EN

Image 14
Contents Always there to help you Register your product and get support atPage Contents Troubleshooting Safety Introduction Check and identify the contents of the package Main unitM5x8mm Screw Remote control Battery Quick start guide Whats in the boxMAP ResetOverview of the main unit AV-INOverview of the remote control System Install the car EntertainmentPreset +/PRESET NaviConnect wires External BOX Connector 10 EN Mount into the dashboard Turn on Prepare the remote controlGet started Use the home menu Access the home menuTap to access the home menu 24hr 24-hour time format Adjust the screen brightnessSet the date and time 12hr 12-hour time formatLoad a disc Switch display designsPlay from hard Media Remove the SD/SDHC card Connect a USB storage deviceInsert an SD/SDHC card Asia Pacific,Taiwan, KoreaAudios Control playVideos Browse recorded files PicturesPlay non-VOD DivX videos About DivX videosPlay DivX VOD videos Tap DivXR VOD to display the registration codeListen to radio Switch to radio modeSet up Tune to a radio stationStore radio stations manually Use RDS related featuresStore radio stations in memory Store radio stations automaticallyUse alternate frequencies Receive traffic announcementNavigate your road trip Map to set navigation specificationsInsert the map data card Press NaviPair the first device Activate the Bluetooth functionPair a device Tap it to display the list of paired players Activate the Bluetooth function on thisPair more devices Tap List of paired devices Play audio from a connected deviceManage paired devices Call a number Make a callLocate the external microphone Redial the last called numberEdit the favorite call list Transfer a phone call to mobile phoneUse the on-screen phone book Connect your iPod/iPhone Play from an IPod/iPhoneCompatible iPod/iPhone models Charge your iPod/iPhone Search for a trackAdjust sound Set the sub-woofer Adjust the fader and balanceOthers Select a listening zoneAdjust settings Access system setup menusMCU Adjust general settingsView system information Adjust Navigation settings Adjust Bluetooth settings Use rear monitors OthersPlay external audio/video input Tap to select an available source to start play Switch the control interfacesWheel Replace the fuse Reset the systemSet the rear view camera To clear the assignment, tap Clear AllRead and understand the instructions on firmware upgrade Upgrade the firmwarePerform the upgrade Register your productGeneral BluetoothProduct information Disc playerUSB playability information TroubleshootingGeneral DVDPaired mobile phone connects and disconnects constantly About the Bluetooth deviceDevice cannot be used with the system to play music Trademark notice ComplianceCare of the environment Copyright All rights reserved CED1900BT98UMV1.0