W
/ 
/PRESET +/PRESET -
•Tune to the previous or next preset radio station.
•Skip to the previous or next folder.
X
•Press to turn on the system.
•Press and hold to turn off the system.
•Press to mute the speakers or release them from mute status.
YNAVI
•Press to access the navigation system.
3 Install the car |
|
| |
entertainment | English |
system |
|
Always follow the instructions in this chapter in sequence.
These instructions are for a typical installation. However, if your car has different requirements, make the adjustment accordingly. If you have any question regarding installation kits, consult your local retailer.
Note
•• This system is designed for negative ground (earth) 12V DC operation only.
•• Always install this system in the car dashboard. Other locations can be dangerous as the rear of the system heats up during use.
•• To avoid
•• Make sure that you connect the yellow and red power supply leads after all other leads are connected.
•• Make sure that all loose leads are insulated with electrical tape.
•• Make sure that the leads do not get caught under screws iron parts that will move (e.g. seat rail).
•• Make sure that all ground (earth) leads are run to a common ground (earth) point.
•• Use only the supplied mounting hardware for a safe and secure installation.
•• Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional.
•• When you connect other devices to this system, make sure that the rating of the car circuit is higher than the total fuse value of all the connected devices.
•• Never connect speaker wires to the metal body or chassis of the car.
•• Never connect speaker wires with stripes to one another.
EN 7