Set RDS clock
You can use time signal that is broadcast together with the RDS signal to set the clock of the unit automatically.
1Press MENU.
2Press 
/
repeatedly until [CT] displays.
3Rotate 
to select a setting:
•[CT ON]: Turn on the RDS clock. Time shown on the unit synchronizes with that on the RDS station.
•[CT OFF]: Turn off the RDS clock.
Tip
•The accuracy of the transmitted time depends on the RDS station that transmits the time signal.
5 Listen to |
|
Digital Audio | English |
Broadcasts |
|
(DAB) |
|
Digital Audio Broadcasting (DAB), is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality, and more information.
For the first time when DAB mode is switched on.
1Press SOURCE on the main unit repeatedly to select DAB/DAB+.
»The system performs auto scan.
»All the available DAB stations are stored.
»The radio tunes to the first available station
Tip
•The display shows a rectangle. The position of the rectangle indicates the degree of signal strength. (The further towards the right, the greater the signal strength.)
•If there is no DAB coverage currently available, or DAB signal is too weak in your area, no DAB station will be found, and message like “No Station Found, Scan Again” displays.
Tune to DAB radio station manually
1 Under DAB mode, press and hold 
/
to enter manual seek mode.
»“MANUAL” blinks on LCD screen.
2 Press 
/
repeatedly until the the desired channel/frequency appears.
EN 15