Philips CEM3000B user manual Troubleshooting

Page 25

Compatible USB storage devices:

USB flash memory: USB 1.1 host with interface reading all speed support (1.1, 2.0)

USB flash players: USB 1.1 host with interface reading all speed support (1.1, 2.0)

Supported formats:

USB or memory file format: FAT16, FAT32

MP3 bitrate (data rate): 32-320 Kbps and variable bitrate

WMA V4, V7, V8, V9 (L1, L2)

ISO9660, Joliet

Maximum title number: 512 (depending on file name length)

Maximum album number: 255

Supported sampling frequencies: 2 kHz, 44.1 kHz, 48 kHz

Supported bitrates: 2~256 (kbps), variable bitrates

Directory nesting up to a maximum of 8 levels

Number of albums/ folders: CD maximum 99, USB maximum 199

Number of tracks/titles: maximum 999

ID3 tag v2.0 to v2.4

File name in Unicode UTF8 (maximum length 64 bytes)

Unsupported formats:

Empty albums: an empty album is an album that does not contain MP3/WMA files, and is not be shown in the display.

Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played.

AAC, WAV, PCM audio files

DRM protected WMA files (.wav, .m4a,

.m4p, .mp4, .aac)

WMA files in Lossless format

11 Troubleshooting

Caution

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this apparatus, check the following points before requesting service.

No power or no sound.

Car engine is not on. Switch on the car engine.

Cable is not correctly connected. Check connections.

Fuse is burnt. Replace fuse.

Volume is too low. Adjust volume.

If the above solutions cannot help, press the RESET button.

Make sure that the track played is of a compatible format.

Noise in broadcasts.

Signals are too weak. Select other stations with stronger signals.

Check the connection of the car antenna.

Change broadcast from Stereo to mono.

Cannot play disc

make sure that the disc label is inserted with the printed side facing up.

Wipe the disc with fiber cleaning cloth from the center to the edge in a straight line.

This disc may be defective. Play another disc.

Make sure that the CD is a finalized CD/CD-R/CD-RW.

Make sure that the CD is not encoded with copyright protection technologies.

The CD skips tracks

Make sure that the CD is not damaged or dirty.

Make sure that random mode is deactivated.

26EN

Image 25
Contents CEM3000B Contents Never place any objects other than discs into the apparatus SafetyKoninklijke Philips Electronics N.V. All rights reserved RecyclingIntroduction Your car audio systemWhat’s in the box Overview of the main unit Overview of the remote control Clock View clock Get started Install the car audioAttach the front panel Place the DAB antennaTurn on Install remote control batterySet clock Tune to a radio station Listen to radioView clock Select tuner regionStore radio stations in memory Tune to a preset stationPlay with RDS Select alternate frequencies Set region for AF tuningReceive traffic announcement Broadcasts Listen to Digital AudioTune to DAB radio station manually Set RDS clockProgram DAB radio stations manually Scan for new DAB stationsDisplay DAB information DAB Dynamic Range Control Weak DAB signalDAB Antenna DAB sorting Play audio filesPlay a disc Search for an MP3/WMA Track Play from USBView play information Repeat playIntro play Shuffle playPlay from iPod/iPhone Compatible iPod/iPhoneControl music playback on iPod/ iPhone Connect external sound sourceSearch for a track on iPod/iPhone Adjust sound Turn demo mode on/off Select blackout settingTurn beep sound on/off LCD ColorAdditional information ResetDimmer Detach the front panelRemove the unit Product informationTroubleshooting MP3 Glossary