13 Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the device is nearby and the model number and serial number are available.
No power
•• Car engine has not been started. Start the car engine.
•• Connections are incorrect.
•• Fuse has been damaged. Replace fuse.
No sound
•• Volume is too low. Adjust volume.
•• Speaker connections are incorrect.
No response to the remote control
•• Ensure that the path between the remote control and the unit is clear from obstacles.
•• From a close distance, point the remote control directly at the unit.
•• Switch F/R to correct position (F for front control and R for rear control).
•• The function does not work. See the instruction manual.
•• Replace the remote control battery.
Disc does not play
•• Disc is upside down. Ensure that the printed side is upwards.
•• Disc is dirty. Clean the disc with a clean, soft,
•• Disc is defective.Try another disc.
•• incompatible disc is used.Try another disc.
•• Disc rating exceeds the restriction setting. Change the rating settings to lower one.
•• Disc region code is not compatible with |
|
| |
the unit. Use disc with proper region code. | ng l i s h |
Can’t play DivX file from SD or USB | |
•• This device doesn’t support DivX playback | E |
in SD or USB mode. |
|
No image |
|
•• Parking wire connection is incorrect. Check |
|
the wiring. |
|
No image on rear display |
|
•• Check if you are playing DivX video. If |
|
yes, it’s normal, for this device does not |
|
support video out in DivX playing mode. |
|
Image flashes or distorted |
|
•• Video DVD settings do not match with the |
|
DVD. Adjust video DVD settings. |
|
•• Video connection is improper. Check the |
|
connections. |
|
Noise in broadcasts. |
|
•• Signals are too weak. Select other stations |
|
with stronger signals. |
|
•• Check the connection of the car antenna. |
|
•• Change broadcast from stereo to mono. |
|
Preset stations lost. |
|
•• Battery cable is not correctly connected. |
|
Connect the battery cable to the terminal |
|
that is always live. |
|
Fuse is broken |
|
•• The fuse type is incorrect. Replace it with |
|
a 15A fuse. |
|
•• Speaker wire or power wire is grounded. |
|
Check the connections. |
|
Display show |
|
•• USB/SD/MMC data error. Check the USB |
|
device or SD/MMC card. |
|
About the Bluetooth device
Music playback is unavailable on the system even after successful Bluetooth connection.
•• The device cannot be used with the system to play music.
EN 39