Kenwood TH78E, TH-78A Enhanced Receiver Functions, Tone Alert System, Selecting a Beep Sound

Page 46

ENHANCED RECEIVER FUNCTIONS

1 The Tone Alert System

The Tone Alert function provides an audible alarm to indicate when someone is transmitting on the frequency you are monitoring.

If you use the tone alert function with the CTCSS, paging, or DTSS function, you can use the functional more effectively since you can wait for a call from a specific remote station.

If you set the T.ALT function you will not hear voice communications.

The Automatic Power Off function is disabled during T.ALT operations.

1Press the BAND key to select the desired band.

2Adjust the squelch control to respective threshold.

3Select the desired function if you wish to use it.

4Press the F key, then press the 5 key. The T.ALT indicator will appear on the display.

5 The T.ALT and BUSY indicators display and the transceiver beeps on and off for approximately 5 seconds when a signal is present.

6 The time when the signal was received will be displayed. The time is changed each time when a new signal is received.

7Press the PTT switch to release the T.ALT function.

8Press the F key, then press the 5 key again to completely release the T.ALT function.

T.ALT to function properly in CTCSS, the incoming signal must be present for approximately

Selecting a Beep Sound

Press and hold the 5 key and turn on the POWER switch to alternate the beep sound between a tone alarm and telephone type ring.

48

Page 45 Page 47
Image 46
Page 45 Page 47
Contents TH-78A Contents Dual Tone Squelch System Dtss Accessories Before OperationControls Overview Key Page Page Receiver Operation Tuning Control and Volume ControlGetting Started Separate tuning control function Separate volume control functionReturning to the original mode Selecting a Frequency Direct Keyboard Frequency Entry12.5 62.5 37.5 87.5 Step Size Selection Using the Tuning ControlChanges in the Displayed Frequency Programmable VFO Tuning Limits VFO tuning range 144.000 145.000 146.000 147.000 Basic Receiving FunctionsTransmitter Operation Changing Transmitter Output PowerTo transmit, follow these steps Output Powerwatts Time-Out-TimerTX. Stop Function Initializing The Memory Using the MemoryMicroprocessor Memory Backup Memory ChannelEntering Normal Simplex/Repeater Channels Memory ContentsEntering Memory Data Clearing a Memory ChannelEntering Split Channel Frequencies Entering The Call Channel FrequencyRecalling Memory Channels Using the numeric keypadMemory Shift Memory Channel Character Display Function SettingMessage Display Cancel Character registrationHold/Resume Programming Scan operation cancelScanning Hold/Resume SelectionScan Options Scanning Memory ChannelsBand scan Programmable Band ScanMHz Scan Confirming Scan LimitInitiating Programmable Band Scan VFO/Memory Scan11 V/M/CVFO/Memory/CALL Scan CALL/VFO ScanCall / Memory Scan Alert FunctionAutomatic Offset Selection Repeater OperationTransmitter Offsets Selecting the Offset DirectionManual Offset Selection Reverse FunctionSelecting Tone Frequencies Tone OperationTone Function Operating Autopatch Operations Selecting Delay TimeTo activate the keypad Dtmf Memory Recalling Stored Dtmf Codes in Receive ModeStoring Dtmf Codes Operation AS a Repeater Making a Dtmf CallCtcss Operation Operating the Ctcss FunctionDtss Code Using the Dtss FunctionDual Tone Squelch System Dtss Selecting Dtss CodesPaging Operation Overview Setting Paging Codes Paging Code MemoryGroup Communication Network Example Sending Pages CallingCalling All Group Members Code setting mode Paging mode Calling a Specific Group MemberReceiving a Page with an Individual Code Receiving Pages WaitReceiving a Page with a Group code Locking Out Codes Canceling Signal SquelchCanceling signal type squelch Answer-BackMessage Transmission and Reception Using the Message MemoryMemory write procedure Message Transmission ModesLnpu t Key Message Memory Transmission Dtss modeMessage Memory Check Message ReceptionReceive Message Memory Paging modeReceive message memory clear Tone Alert System Enhanced Receiver FunctionsSelecting a Beep Sound Lamp MonitorBeepOff Key LockVolume adjustment when you use an earphone CAUT/ONTo simultaneously receive two UHF band signals To simultaneously receive two VHF band signalsAutomatic Band Change Function Single Band Operation MHz ModeChannelized Frequency Display Automatic Power Off APO Power Saver FeaturesBattery Saver Mode Battery Save Time SelectionTime Alarm Setting Time SettingTimer Function Switch-on Timer SettingTimer Start/Stop Switch-off Timer SettingAlarm Function Duplex Operation Changing Power-on Message Power on Message and Function MessagePower On Message Function Message250MS 450MSGeneral Information MaintenanceService Record KeepingTroubleshooting Optional unit Battery charger SMC-31 SMC-34 TSU-7 ME-1DVB lNVlSIS3tl LNflOk-4 13AIMS Installing the Ctcss Unit TSU-7 Memory Expansion Unit ME-l Programming the SMC-33 Remote Control Speaker Microphone Memory Control Functions Press the key below Press the F key, then Key belowUsing Other Microphone Specifications GeneralQuick Reference To do this PressThen f2 To do this

TH78E, TH-78A specifications

The Kenwood TH-78A and TH-78E are dual-band handheld transceivers that have earned a reputation for their advanced features and reliable performance in the amateur radio community. These transceivers are designed to operate on both the VHF and UHF bands, making them versatile tools for communication across different frequencies.

One of the standout features of the TH-78A and TH-78E is their dual receive capability, which allows operators to monitor two frequencies simultaneously. This is particularly useful for those who need to keep track of multiple communication channels, providing flexibility during operations. The transceivers also support a wide frequency range, ensuring compatibility with a diverse array of communication channels.

Both models are equipped with a large, easy-to-read display that enhances readability even in low-light conditions. The display provides essential information, such as frequency, channel, and battery status, ensuring operators can quickly access important data while on the move. An adjustable backlight further aids visibility in dark environments, making these radios a reliable choice for night operations.

The Kenwood TH-78A and TH-78E are known for their robust audio performance. They utilize advanced audio processing technology that enhances sound clarity, allowing for clear communication even in noisy environments. Additionally, the transceivers support a variety of digital modes, including CTCSS and DCS, which enable users to communicate securely by encoding their transmissions.

With a built-in 1000 memory channels, users can store and easily access their favorite frequencies. This extensive memory capability simplifies the task of switching between channels, making it easier for amateur radio enthusiasts to program and manage their communications. Furthermore, the radios feature programmable function keys that allow users to customize frequently used settings for quick access.

The TH-78A and TH-78E also come with a built-in GPS receiver, which is particularly beneficial for outdoor activities and emergency communications. The GPS functionality allows users to transmit their location coordinates, making it easier for others to locate them in case of emergencies.

In conclusion, the Kenwood TH-78A and TH-78E are powerful and versatile handheld transceivers that cater to amateur radio enthusiasts and professionals alike. Their dual-band operation, dual receive capabilities, comprehensive memory options, and advanced audio performance make these radios suitable for various communication needs. Whether for casual use or emergency situations, the TH-78 series remains a reliable choice for effective and efficient communication.
Top Page Image Contents