Kenwood TH78E, TH-78A Single Band Operation, MHz Mode, Channelized Frequency Display

Page 50

Notes on simultaneous in Band reception

1 When two signals on the same band are received simultaneously, the receive performance, such as image interference and sensitivity, may be reduced.

2 If the two frequencies are the same, the volume may decrease at some VOL control positions.

To return to normal operation press the f² key again.

10 Single Band Operation

When you press the DUAL key, the band for which the PTT indicator is on is selected, and you can perform a single-band operation with that band.

When you press the BAND key, the band in the single-band operation changes.

Each time you press the DUAL key, you toggle between single-band and dual-band operation.

11 MHz Mode

If you use this function, you can change the frequency in l-MHz steps.

Press the MHz key.

The 100-kHz digit and lower digits of the operation band go blank. When you turn the tuning control, the frequency changes in l-MHz steps.

To return to the normal frequency display, press any front panel key (except E.CHG key) or wait 10 seconds.

12 Channelized Frequency Display

The frequency display can be changed to display channel numbers instead of the operating frequency. This function makes use of the data you have stored in memory for this function. Channel 1 is memory channel 1, Channel 2 is memory channel 2, etc.

1Turn the POWER switch off.

2Press and hold down the 3 key, then press the POWER switch.

Channel number are displayed for both bands

3The channel number can be changed with the tuning control.

4To return to the normal frequency display, perform steps 1 and 2 again.

52

Page 49 Page 51
Image 50
Page 49 Page 51
Contents TH-78A Contents Dual Tone Squelch System Dtss Accessories Before OperationControls Overview Key Page Page Getting Started Tuning Control and Volume ControlReceiver Operation Returning to the original mode Separate volume control functionSeparate tuning control function Selecting a Frequency Direct Keyboard Frequency Entry12.5 62.5 37.5 87.5 Changes in the Displayed Frequency Using the Tuning ControlStep Size Selection Programmable VFO Tuning Limits VFO tuning range 144.000 145.000 146.000 147.000 Basic Receiving FunctionsTo transmit, follow these steps Changing Transmitter Output PowerTransmitter Operation TX. Stop Function Time-Out-TimerOutput Powerwatts Initializing The Memory Using the MemoryMicroprocessor Memory Backup Memory ChannelEntering Normal Simplex/Repeater Channels Memory ContentsEntering Memory Data Clearing a Memory ChannelEntering Split Channel Frequencies Entering The Call Channel FrequencyMemory Shift Using the numeric keypadRecalling Memory Channels Memory Channel Character Display Function SettingMessage Display Cancel Character registrationHold/Resume Programming Scan operation cancelScanning Hold/Resume SelectionScan Options Scanning Memory ChannelsBand scan Programmable Band ScanMHz Scan Confirming Scan LimitInitiating Programmable Band Scan VFO/Memory Scan11 V/M/CVFO/Memory/CALL Scan CALL/VFO ScanCall / Memory Scan Alert FunctionAutomatic Offset Selection Repeater OperationTransmitter Offsets Selecting the Offset DirectionManual Offset Selection Reverse FunctionTone Function Operating Tone OperationSelecting Tone Frequencies To activate the keypad Selecting Delay TimeAutopatch Operations Storing Dtmf Codes Recalling Stored Dtmf Codes in Receive ModeDtmf Memory Operation AS a Repeater Making a Dtmf CallCtcss Operation Operating the Ctcss FunctionDtss Code Using the Dtss FunctionDual Tone Squelch System Dtss Selecting Dtss CodesPaging Operation Overview Setting Paging Codes Paging Code MemoryCalling All Group Members Sending Pages CallingGroup Communication Network Example Code setting mode Paging mode Calling a Specific Group MemberReceiving a Page with a Group code Receiving Pages WaitReceiving a Page with an Individual Code Locking Out Codes Canceling Signal SquelchCanceling signal type squelch Answer-BackMessage Transmission and Reception Using the Message MemoryMemory write procedure Message Transmission ModesLnpu t Key Message Memory Transmission Dtss modeMessage Memory Check Message ReceptionReceive message memory clear Paging modeReceive Message Memory Selecting a Beep Sound Enhanced Receiver FunctionsTone Alert System Lamp MonitorBeepOff Key LockVolume adjustment when you use an earphone CAUT/ONAutomatic Band Change Function To simultaneously receive two VHF band signalsTo simultaneously receive two UHF band signals Channelized Frequency Display MHz ModeSingle Band Operation Automatic Power Off APO Power Saver FeaturesBattery Saver Mode Battery Save Time SelectionTime Alarm Setting Time SettingTimer Function Switch-on Timer SettingAlarm Function Switch-off Timer SettingTimer Start/Stop Duplex Operation Changing Power-on Message Power on Message and Function MessagePower On Message Function Message250MS 450MSGeneral Information MaintenanceService Record KeepingTroubleshooting Optional unit Battery charger SMC-31 SMC-34 TSU-7 ME-1DVB lNVlSIS3tl LNflOk-4 13AIMS Installing the Ctcss Unit TSU-7 Memory Expansion Unit ME-l Programming the SMC-33 Remote Control Speaker Microphone Memory Control Functions Press the key below Press the F key, then Key belowUsing Other Microphone Specifications GeneralQuick Reference To do this PressThen f2 To do this

TH78E, TH-78A specifications

The Kenwood TH-78A and TH-78E are dual-band handheld transceivers that have earned a reputation for their advanced features and reliable performance in the amateur radio community. These transceivers are designed to operate on both the VHF and UHF bands, making them versatile tools for communication across different frequencies.

One of the standout features of the TH-78A and TH-78E is their dual receive capability, which allows operators to monitor two frequencies simultaneously. This is particularly useful for those who need to keep track of multiple communication channels, providing flexibility during operations. The transceivers also support a wide frequency range, ensuring compatibility with a diverse array of communication channels.

Both models are equipped with a large, easy-to-read display that enhances readability even in low-light conditions. The display provides essential information, such as frequency, channel, and battery status, ensuring operators can quickly access important data while on the move. An adjustable backlight further aids visibility in dark environments, making these radios a reliable choice for night operations.

The Kenwood TH-78A and TH-78E are known for their robust audio performance. They utilize advanced audio processing technology that enhances sound clarity, allowing for clear communication even in noisy environments. Additionally, the transceivers support a variety of digital modes, including CTCSS and DCS, which enable users to communicate securely by encoding their transmissions.

With a built-in 1000 memory channels, users can store and easily access their favorite frequencies. This extensive memory capability simplifies the task of switching between channels, making it easier for amateur radio enthusiasts to program and manage their communications. Furthermore, the radios feature programmable function keys that allow users to customize frequently used settings for quick access.

The TH-78A and TH-78E also come with a built-in GPS receiver, which is particularly beneficial for outdoor activities and emergency communications. The GPS functionality allows users to transmit their location coordinates, making it easier for others to locate them in case of emergencies.

In conclusion, the Kenwood TH-78A and TH-78E are powerful and versatile handheld transceivers that cater to amateur radio enthusiasts and professionals alike. Their dual-band operation, dual receive capabilities, comprehensive memory options, and advanced audio performance make these radios suitable for various communication needs. Whether for casual use or emergency situations, the TH-78 series remains a reliable choice for effective and efficient communication.
Top Page Image Contents