6 Change settings
This section helps you to change the settings of your home theater.
Caution
•Most of the settings are already configured with the best value for the home theater. Unless you have a specific reason to change a setting, it is best to leave it at the default value.
Access the setup menu
1 Press 
SETUP.
»The following menu appears.
SymbolDescription
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2 Select a setup menu, then press OK.
See the following sections for information about how to change the settings of your home theater.
3 Press 
BACK to return to the previous menu, or press 
SETUP to exit.
Note
•You cannot change a setting that is grayed out.
Change general settings
1 | Press SETUP. |
2 | Select [General Setup], then press OK. |
3 | Select and adjust the following settings: |
| • [Disc Lock] : Restricts play to disc. |
| Password (PIN code) is required to |
| unlock the disc before play. |
| • [Display Dim] : Changes the brightness |
| of the display panel. |
| • [OSD Language] : Selects the on- |
| screen display menu language. |
| • [Screen Saver] : Enables or disables |
| screen saver mode. If enabled, the |
| screen enters idle mode after 10 |
| minutes of inactivity (for example, in |
| pause or stop mode). |
| • [Sleep Timer] : Sets a sleep timer to |
| switch the home theater to standby |
| after a specific time. |
| • [Auto Standby] : Enables or disables |
| auto standby. If enabled, the home |
| theater switches to standby after 30 |
| minutes of inactivity (for example, in |
| pause or stop mode). |
| • [DivX(R) VOD Code] : Displays the |
| DivX VOD registration code for the |
4 | home theater. |
Press OK to confirm your choice. |
Note
•Before you purchase DivX videos and play them on the home theater, register the home theater on www.divx.com using the DivX VOD code.
14EN