XDVD8265 OPERATION 
Control Locations - Receiver
1
3
4
5
6
7
8
9
10
2
1Eject - Press 
to allow the front panel to slide down to insert/eject discs.
2Reset - Press and hold the RESET button to reset the main unit upon initial installation or if abnormal operation occurs. The reset button is located to the right side of the disc slot.
3Angle - Press to select between 4 different monitor view angles.
4Mute - Press to silence the audio, press again to cancel.
5Mode - Press to select between various modes of operation.
6Volume Up - Press to increase the volume level.
7Volume Down - Press to decrease the volume level.
8Power - Press 
to turn the unit on/off.
9Infrared Sensor
10TFT Touch Screen LCD
Caution
•Due to its highly technological design, the XDVD8265 faceplate is NOT removable. Do not attempt to remove the faceplate.
•This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not obstruct the dash or shifter.
•Upon installation, do not attempt to move the monitor by hand. Use the ANGLE button on the faceplate or the remote control only.
9