Dual XDVD8285 XM Radio Operation Optional, Standard/Preset Mode Channel Select Direct Tuning

XDVD8285 OPERATION

XM Radio Operation (Optional)

Activating Your XM Tuner (when connected)

Standard/Preset Mode

Channel Select

Direct Tuning

1. Select XM mode.

2.Verify channel 1 (XM Preview Channel) is playing.

3.Select Channel 0. The XM tuner's eight character Radio ID number will appear at the top of the screen.

The Radio ID number is also located on the XM tuner (sold separately).

4.Record the number here for future reference:

5.Activate your XM Satellite Radio service by logging on to http://www.xmradio.com/activation or call 1-800-967-2346.

Note: You will need to keep your unit turned on for at least one hour after requesting activation to receive the full channel line-up.

Touch on the screen to switch between Standard Mode and Preset Mode. In Standard Mode, XM is displayed in location 21 on the screen. In Preset Mode, location 21 will display either XM-1, XM-2 or XM-3 to denote which preset bank is selected. Each press of the button will change the display from XM to XM-1 to XM-2 to XM-3 and back to XM.

From the remote control:

Press the BAND button.

Touch CH+ or press to select the next channel.

Touch CH- or press to select the previous channel.

From the remote control:

Press to select the next channel.

Press to select the previous channel

Note: The on-screen and buttons will select channels within the current category only.

To select a desired channel from the channel/preset channel list, touch any of the displayed channel names from the list.

Use the up and down arrows on screen to scroll through the channels. Once highlighted, simply touch the screen at the appropriate channel.

Use Rapid Dial rotary encoder to select desired channel.

•Select desired channel by rotating clockwise or counter-clockwise.

•Press to confirm/ENTER.

79