XDVDN8290 OPERATION
Control Locations - Monitor Closed
1 | 7 |
2 | 8 |
3 | 9 |
4 | 10 |
5 | 11 |
6 | 12 |
| 13 |
|
| 14 |
|
1 | Power/Mute | 8 | Channel/Chapter/Track Up/Zoom Out |
2 | AM/FM Mode - Hotkey | 9 | Channel/Chapter/Track Down/Zoom In |
3 | Auto Store/Preset Scan | 10 | Position Button (Navigation only) |
4 | Mode | 11 | Info/Picture |
5 | Menu | 12 | Reset |
6 | Rotary Encoder/Enter | 13 | Open/Close Monitor/Angle Adjust |
7 | Navigation Mode - Hotkey |
|
|
Monitor Notes:
•This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not obstruct the dash, shifter or any other controls.
•Upon installation, do not attempt to move the monitor by hand. Use the 
button on the front panel only or the OPEN button on the remote control.
•The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press 
or OPEN again to resume the monitor open/close sequence.
9