Coustic manual Installation Instructions, Model, HP46.4 4 X 6 Two-Way

Page 2

RADIO/CASSETTE/CD

PLAYER

HP40.4

 

HP40.4

HP46.4

 

HP46.4

HP52.4

 

HP52.4

HP64.4

 

HP64.4

HP65.4

 

HP65.4

 

 

 

 

 

 

HP68.4

 

HP68.4

HP692.4

 

HP692.4

HP693.4

 

HP693.4

 

 

 

Congratulations...

On your purchase of our Coustic speakers engineered specially for use in automotive environments. Over the years these Coustic speakers will give you countless hours of unparalleled listening pleasure while you are on the road.

However, to ensure that your Coustic speakers perform at their highest level of efficiency, read the instructions thoroughly and follow the precautionary steps and instructions as listed. That done, you will then have superb sound reproduction from speakers designed specifically by Coustic for use in automobiles.

But Coustic does not just manufacture automotive speakers, we also build innovative power amplifiers, high performance subwoofers, state-of-the-art real-time analyzers and esoteric electronic crossovers. In other words, everything you need to create the ultimate car audio.

SPECIFICATIONS

 

Power

Frequency

Sensitivity

Input

 

Handling

Response

(1 watt,

Impedance

 

(watts)

(±5dB)

1 meter)

 

 

 

 

 

 

HP46.4

65 watts

58-20k Hz

90 dB SPL

4 Ohms

INSTALLATION

INSTRUCTIONS

MODEL:

HP46.4 4” X 6” Two-Way

INSTALLATION PREPARATIONS AND PRECAUTIONS

1.Make sure car audio system is turned off before speaker installation begins.

2.Metal clips and filings should be kept away from speakers;

WORK AS CLEANLY AS POSSIBLE.

3.Install each speaker as firmly as possible. To maximize high frequency reproduction, make sure there is no obstruction between speaker and interior of the vehicle.

4.Make sure speaker cone has sufficient breathing room.

5.Speakers must be wired IN PHASE to produce the best sound fidelity. Double check audio system for correct phasing (i.e., “+” “+”, “-” “-”).

6.Before doing any cutting or drilling, check all clearances and mounting locations again. Check position of both speakers (not just one) in case car doors are not symmetrical (e.g., multiple electric window controls on the driver’s side only).

INSTALLATION

The HP46.4 is designed to fit European and GM vehicles with- out extra adapters. Refer to the different installation applications outlined in this instruction.

Coustic Car Audio

7676 South 46th Street, Suite 2020

Phoenix, AZ 85040

www.coustic.com

©2000 COUSTIC is a registered trademark of the Mitek Corporation

All Rights Reserved.

#21A3972

Image 2
Contents Table of Installation Measurements HP46.4HP46.4 4 X 6 Two-Way Installation InstructionsModel