JVC LVT1047-001A manual Contents, Precautions for installation, Precautions for Daily Use

Models: LVT1047-001A

1 8
Download 8 pages 42.42 Kb
Page 2
Image 2

Contents

 

 

Page

Warnings, Cautions and Others

......................................... 1

Assembly

2

Connection

5

General Layout of Speakers

6

Specifications

6

Thank you for purchasing a JVC speaker system. Before you begin using these speakers, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer.

Warnings, Cautions and Others

5Precautions for installation

Do not install the speakers on an uneven surface or in a place subject to vibration; otherwise, they may fall over, causing damage or injury.

Take the occurrence of earthquakes or other physical shocks into consideration when selecting the installation place, and secure the speakers thoroughly.

To prevent deformation or discoloration of the cabinet, do not install the speakers where they are exposed to direct sunlight or high humidity, and avoid installation near air conditioning outlets.

Speaker vibrations may cause howling. Place the speakers as far away from the player as possible.

The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.

When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the

speakers.

Then wait at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers further away from the TV.

Tuner reception may become noisy or hissing if a speaker is installed near the tuner. In this case, leave more distance between the tuner and the speakers or use an outdoor antenna for better tuner reception without interference from the speakers.

5Precautions for Daily Use

To maintain the appearance of the speakers

Wipe with a dry, soft cloth if the cabinet or control panel should become dirty.

If very dirty, apply a small amount of water or neutral detergent to the cloth and wipe clean, then wipe with a dry cloth.

To improve the sound field

If the speakers are facing a solid wall or glass door, etc., it is recommended to furnish the wall with materials that absorb sounds, for example by hanging up thick curtains, to prevent reflections and standing waves.

To use the speakers without any trouble

Do not reproduce sounds at so high a volume that they are distorted; otherwise, the speakers may be damaged by internal heat buildup.

When moving the speakers, do not pull the speaker cords; otherwise, the speakers may fall over, causing damage or injury.

When holding a satellite speaker, do not grasp the speaker (upper) portion, but always grasp the leg (lower) portion of the satellite speaker.

5Checking the supplied Accessories

Check to be sure you have the following supplied accessories. The number in parenthesis indicates the quantity of the piece supplied.

• Speaker cords

Approx. 5 m (3);

For satellite speakers for front left/ right channel and center speaker

Approx. 10 m (2);

For satellite speakers for surround left/right channel

• Screws (with washer)

M4 x 25 mm (16)

If any of the items above are missing, contact your dealer immediately.

Speaker and Speaker cords— to improve the sound quality

When connecting the speaker cords

Make sure to match the polarity (ª and ·); otherwise, the sound will lose the surround effect.

After connecting, check that the exposed cores are fully inserted into the terminal.

When using other speaker cords

Observe the following;

Buy thick speaker cords rather than thin cords, and make them as short as possible for connection.

Use speaker cords of the same length for both left and right speakers.

Do not use long speaker cords; otherwise, the sound quality may deteriorate.

– 1 –

Page 2
Image 2
JVC LVT1047-001A Contents, Precautions for installation, Precautions for Daily Use, Checking the supplied Accessories

LVT1047-001A specifications

The JVC LVT1047-001A is a versatile audio receiver designed to elevate the home entertainment experience. With its sleek design and advanced technological features, this model has captured the attention of audiophiles and casual listeners alike.

At the heart of the JVC LVT1047-001A is its robust audio performance. The receiver supports various audio formats, including Dolby Digital and DTS, ensuring that users experience high-quality sound with every use. Its numerous input options allow for seamless connectivity with multiple devices, including televisions, DVD players, and gaming consoles. This makes it a perfect choice for those looking to create a comprehensive home theater setup.

One of the standout features of the LVT1047-001A is its built-in Bluetooth technology. This allows users to stream music wirelessly from smartphones, tablets, and other Bluetooth-enabled devices. The convenience of wireless streaming, combined with JVC's signature sound quality, enhances the overall user experience, making it easy to enjoy music without the clutter of cables.

In addition to wireless capabilities, the receiver includes several HDMI inputs and outputs, supporting 4K video passthrough for a crystal-clear visual experience. This feature is particularly valuable for users who want to connect their high-definition devices and enjoy amazing picture quality. The HDMI ARC (Audio Return Channel) function further simplifies the setup process by allowing audio to travel in both directions along the same HDMI cable, making it easier to connect to compatible TVs.

The LVT1047-001A also boasts a range of sound enhancement technologies to optimize audio performance. These include a built-in equalizer, which allows users to customize sound profiles based on their preferences or the type of media being played. Additionally, the receiver incorporates advanced processing techniques to reduce distortion and enhance dynamic range, resulting in crisp dialogues and immersive soundscapes.

User-friendly controls and an intuitive interface contribute to the appeal of the JVC LVT1047-001A. The remote control provides easy access to various settings, while the front panel features clearly labeled buttons for manual operation.

In summary, the JVC LVT1047-001A stands out as an exceptional audio receiver, combining versatile connectivity options, Bluetooth streaming, HDMI capabilities, and advanced sound processing technologies. With its thoughtful design and feature-rich performance, this model is an excellent choice for anyone looking to upgrade their home audio experience.