Features

ASYMMETRICAL ELECTRONIC CROSSOVER DESIGN

The advantage of asymmetrical crossovers over “symmetrical” crossovers is the ability of the former to eliminate undesirable peaks and dips in frequency response caused by resonant frequencies present in all enclosed space. Since the crossover points can overlap or underlap the resonant frequencies (i.e. "asymmetrically"), Coustic XM series allows you to create an acoustically flat and smooth frequency response environment.

LINE LEVEL INPUTS

XM series crossovers feature pre-amp inputs for use with source units that have RCA or line level outputs. An independent set of line level inputs are provided on the XM4 for front, rear and sub connections. These connections allow for front to rear fading and independent sub control (see Parallel Input Switch).

SPEAKER LEVEL INPUTS

The Coustic XM2 features speaker level inputs, allowing the crossover to work with source units that do not have RCA or line level outputs. The audio signal can be obtained by simply connecting the XM2’s speaker level input to the source unit’s speaker level outputs.

PARALLEL INPUT SWITCH

This feature allows all XM4 outputs to be driven with either a 2-, 4- or

6-channel input configuration. An adapter is not needed to split the source signal to the front, rear, and sub inputs when the XM4 is used with a source unit that only has a single or dual pair of RCA or line level outputs.

STEREO AND MONO LINE LEVEL OUTPUTS

The XM2 and XM4 feature line level outputs allowing for independent stereo high pass and mono low pass signals to be sent to designated amplifiers. The XM4 includes dual high pass outputs for front and rear fading capability while allowing for a constant mono subwoofer output.

WWW.COUSTIC.COM

HIGH PASS AND LOW PASS VARIABLE LEVEL CONTROLS

The adjustable high pass and subwoofer output levels allow precise control of the signals going to the respective amplifier.

CONTINUOUSLY VARIABLE CROSSOVERS POINTS

This feature allows for individual high pass and low pass crossover settings that can be selected within a range of frequencies to ensure optimum system performance.

BASS BOOST EQ

This feature found on the XM4 enhances the bass performance of the sound system. The output level is continuously variable with a maximum boost of 18dB @ 45Hz.

BASS-DRIVE™ (REMOTE SUB GAIN CONTROL PORT)

The optimum subwoofer output level changes with road noise that varies according to vehicle speed, wind speed and road surfaces. With our exclusive Bass-Drive™, the subwoofer output level can be adjusted via the model R S remote control to minimize the undesirable effect of fluctuating road noise.

PULSE-WIDTH MODULATED (PWM) SWITCHING POWER SUPPLY

The Coustic XM4 features a Pulse-width modulated (PWM) switching power supply. The PWM is used to ensure consistent output performance and to eliminate unwanted noise caused by voltage fluctuation.

SUB PHASE CONTROL SWITCH

Depending on their placement, an acoustical delay may exist between the time the midrange/tweeter signals are heard and the time subwoofer signals are heard. With the XM4’s Phase Inverter, you can compensate for the time delay by shifting the subwoofer output signals 180 degrees out of phase relative to the front and rear output signals.