Dual XPE2700 Connection Descriptions, Ground Wire GND, Remote Turn-on Wire REM, Speaker Wires

Page 3

XPE SERIES INSTALLATION

Connection Descriptions

NOTE

Be sure to follow specific instructions included with your amplifier installation kit (not included with this amplifier). The information below should be used a general guideline only.

Power Wire (+12V)

Disconnect negative battery terminal before proceeding. Consult a qualified technician for instructions if you are unsure.

Plan wire routing before cutting any wires to length. Begin by routing the power +12V wire from the battery to the amplifier location. Use a grommet when running wires through the firewall or metal openings. Avoid running the power wire near existing vehicle wiring to prevent induced noise from entering the audio system.

Use extreme caution when drilling holes to avoid damaging fuel lines or existing vehicle wiring.

The +12V wire MUST be fused within 18" of the battery for protection of the vehicle’s electrical system.

Ground Wire (GND)

The amplifier ground wire should be as short as possible. Choose a clean unpainted section of metal or the vehicle chassis when attaching the ground connection. Be sure to clean the area of any dirt or grease.

Remote Turn-on Wire (REM)

The remote turn-on wire connects to the head unit's amplifier turn-on lead or power antenna output.

Speaker Wires

Choose adequate gauge speaker wire depending on your exact amplifier/speaker combination. Be sure to observe polarity when connecting.

Do not ground any speaker wires or connect any speaker wires together.

Input Signal

The amplifier's input signal connects to the head unit's low level (RCA) or high level (speaker wire) outputs.

Low level input signal deliver the best performance. If unavailable, use the high level inputs - when interfacing with factory head unit for instance.

CAUTION

Do not use both low and high level inputs at the same time - connect only one or the other.

Never run any wires underneath or outside the vehicle.

3

Image 3
Contents XPE Series Mobile Power AmplifiersPreparation Before You StartMounting Location Input Signal Ground Wire GNDRemote Turn-on Wire REM Speaker WiresAudio Inputs and Controls Power and Speaker Connections Fuse Rating Typical Wire RoutingMain Power Connections Power/Ground Wire SizeInput Signal Connections Amplifier ConnectionsSpeaker Connections Input level Control Configuration/SetupCrossover Mode Bass Boost LED IndicatorWhat to do? Limited One-Year WarrantySpecifications XPE Series Operation Problem Cause Action Troubleshooting

XPE2700, XPE1700, XPE4700 specifications

The Dual XPE4700, XPE1700, and XPE2700 represent a series of innovative products designed to meet the demanding needs of modern users in various applications. Each model in this series offers unique features and characteristics that make them stand out in the competitive landscape of electronic devices.

The Dual XPE4700 is the flagship model, featuring advanced processing capabilities and an exceptional design. Equipped with a high-performance processor, the XPE4700 is engineered for multitasking and demanding applications. Its robust graphics capabilities ensure smooth performance for gaming and multimedia tasks. Additionally, it boasts a high-resolution display that offers vibrant colors and sharp images, enhancing the user experience. Connectivity options are versatile, with multiple USB ports, HDMI output, and wireless connectivity, making it an excellent choice for professionals and gamers alike.

The XPE1700, targeted at a more budget-conscious audience, does not compromise on quality. This model features a powerful yet efficient processor, providing users with a seamless experience for everyday tasks such as browsing, streaming, and productivity applications. The XPE1700 is designed with energy efficiency in mind, consuming less power while still delivering reliable performance. Its lightweight design makes it highly portable, catering to users who are always on the go. The display, while slightly lower in resolution than its counterpart, remains vibrant and clear, ensuring users can enjoy their content without sacrificing quality.

The XPE2700 serves as a middle ground between the XPE1700 and XPE4700, offering an optimized blend of performance and features. It is designed to handle more demanding tasks while remaining user-friendly. The processor and RAM configuration allow for effective multitasking, ensuring smooth operation during various applications. The XPE2700 also includes enhanced graphics support, making it suitable for light gaming and graphics-intensive tasks. One of its standout features is the extended battery life, allowing users to stay productive for longer periods without interruption.

Across the series, a strong emphasis is placed on build quality and durability. Each model features a sleek, modern design that appeals to a wide range of users. The incorporation of advanced technologies, such as fast charging and responsive touch screens, enhances usability and efficiency.

In conclusion, the Dual XPE4700, XPE1700, and XPE2700 are expertly crafted devices that cater to diverse user needs, combining performance, quality, and innovative features into a single cohesive series. Whether for gaming, productivity, or everyday tasks, these models deliver a reliable and enjoyable user experience.