Mmunications Anytime, Anywhere, Guide function

mmunications Anytime, Anywhere

Kenwood’s TM-V7E(BL) FM dual-band (144MHz/430MHz) transceiver is packed with powerful on-board features that give it the edge in today’s mobile communications. Take, for instance, the “five-in-one” programmable memory, DTSS and pager functions, 280 memory channels, and the ability to receive two frequencies on the same band. Yet at the same time it offers superb ease of operation, with its user-friend-

ly controls, large LCD and guide function. Outside and in, the TM-V7E(BL) exemplifies the designed-in quality and attention to detail for which Kenwood

is famous.

TM-V7E(BL)

6-pin mini DIN connector for 1200/9600bps packet

The front panel features a connector for hooking up to a TNC, enabling either standard 1200bps or 9600bps high- speed packet communications. And for extra convenience, the TM-V7E(BL) lets you set up separate bands for voice and data.

Quick-release detachable front panel kit (option)

To enhance security, simply remove the compact front panel whenever the car is left unattended. If the optional quick- release kit is used, the panel can be mounted virtually anywhere since the microphone cable connects directly to the main unit.

Guide function

There’s no need to carry the manual with you — the friendly guide function displays operating instructions at the touch of a button.

❚Automatic band change

❚Selectable frequency step

(5, 6.25, 10, 12.5, 15, 20, 25 or 50kHz) ❚Transceiver control function

❚Voice synthesizer (requires VS-3 option) ❚Incremental MHz key ❚S-meter squelch ❚Time-out timer ❚Audible frequency identification

❚Auto repeater offset (144MHz) ❚Separate speaker terminals for each band (switchable)

❚Power-on message ❚Contrast adjustment ❚Dimmer control ❚Auto power-off circuit

❚Heavy-duty construction ❚Optional MC-53DM multi-function backlit mic with DTMF

Quick-release front panel installations

The typical installations illustrated here demonstrate just two of the many ways in which detachable front panel kits may be used with the TM-V7A(BL). For a minivan, the main unit can be installed out of the way under a front seat. In the case of a pas- senger car, it can be installed in the trunk. The choice of cable lengths ensures full versatility to suit a wide variety of vehicles.

Note: Not all kits are sold as shown; see Optional

Accessories for exact kit contents.

DFK-7C cable kit

DFK-4C cable kit