Dual XDMA550BT Making a Phone Call, Manual Dialing Recent Calls List Redialing the last number

Manual Dialing

Recent Calls List

Redialing the last number

Making a Phone Call

•Press once. "Enter Phone Number" will be shown, then an "_" will appear on the display.

•Using the remote control, enter the phone number using the 0-9 buttons. Press on the remote control or XDMA550BT front panel to begin dialing.

Note: Placing a phone call from your cell phone will also use the Bluetooth function of the XDMA550BT.

•Press SELECT from Bluetooth mode to view the 10 most recent phone calls that were dialed, received or missed while connected to the XDMA550BT.

•Turn the volume knob to cycle through the recent phone numbers. Press SELECT or to dial the phone number.

To redial the last phone number, press two times from Bluetooth mode. Dialing will begin automatically.

Receiving a Phone Call

Ending a Phone Call

Receiving and Ending Phone Calls

Incoming phone calls will automatically appear on the display and a ring tone will be heard.

Note: The volume of the ring tone depends on the volume level of the XDMA550BT. The incoming ring tone may not be heard if the volume is set to a low level or mute is activated.

•Press to receive the incoming phone call.

•Press to refuse the incoming phone call.

Note: If Auto Answer is set to ON in the setup menu, all phone calls will be received automatically.

During an active phone call, press to end a phone call. If the phone call was received when listening to music in another mode, the XDMA550BT will resume the previous mode.