XDMA7650 OPERATION
General Operation
Power On/Off
Source
Auxiliary Input
Steering Wheel Interface Input
Volume
Display
Reset
Set the Clock
12/24-hour Clock
Press 
or any other button (except EJECT or OPEN) to turn the unit on. Press and hold 
for 3 seconds to turn the unit off.
Press SOURCE to select between AM/FM, CD player, USB, operation of iPod and auxiliary input. Modes of operation are shown in the display.
Note: CD, USB and operation of iPod modes will not appear unless a CD is inserted or USB/iPod devices are connected.
Insert a 3.5mm connector into the front panel AUX port. Connect the other end of the 3.5mm connector to the headphone output of an audio device, MP3 player, etc. Press SOURCE to select AUX mode.
The steering wheel interface input located on the back of the head unit allows connection to the Pacific Accessory Corporation (PAC)
To configure steering wheel controls, follow the instructions provided with the PAC
Adjust volume using volume knob
Press DISPLAY to select between clock and different types of information, such as radio frequency, CD track/elapsed time or MP3/WMA song information.
Press RESET upon initial installation or if abnormal operation occurs. Reset button is located on the front panel.
With the unit on, press and hold DISPLAY until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes. Press DISPLAY momentarily to save the selected time.
The clock will display
6