XDMA7650 OPERATION
General Operation
Audio
Bass
Treble
Balance
Fader
EQ
Subwoofer
Source Volume Level
Press AUDIO momentarily to select between Bass, Treble, Balance, Fader, EQ, Subwoofer and Source Volume Level.
BASS 
TREBLE 
BALANCE 
FADER 
EQ 
SUBWOOFER* 
SOURCE LEVEL 
Press AUDIO until BASS appears then rotate volume knob left/right to adjust (
Press AUDIO until TREBLE appears then rotate volume knob left/right to adjust (
Press AUDIO until BAL appears then rotate volume knob left/right to adjust (BAL LEFT 12 - BAL RIGHT 12).
BAL EVEN represents equal balance
Press AUDIO until FADER appears then rotate volume knob left/right to adjust (FADER FRONT 12 - FADER REAR 12). FAD EVEN represents equal fader
Press AUDIO until EQ appears. Rotate the volume knob left/ right to select between FLAT (default), POP, JAZZ, CLASSIC, BEAT, ROCK and USER equalization curves. Press SELECT to confirm. Any manual adjustment to the Bass or Treble settings are automatically saved as USER.
Press AUDIO until SUB appears then rotate volume knob left/right to adjust (0 minimum / +12 maximum).
*Note: Subwoofer option will not appear if disabled in the setup menu. Refer to page 7 for details.
The source volume level control allows a gain adjustment for each audio source: AM, FM, CD, AUX, USB and operation of iPod. Set the source volume level for each mode, depending on the relative volume of each audio source.
To set the source volume level, press AUDIO until SRC LEVEL appears. After one second, the current mode will appear on the display. Turn the volume knob to adjust the audio level of the current source
Note: Only the current mode will be available for adjustment. To adjust another mode of operation, press SOURCE until the desired mode is selected, then set the source volume level for that mode.
8