XDM7510 OPERATION
Tuner Operation
Seek Tuning
Manual Tuning
Scan Tuning
Local/Distance
Band
Frequency Spacing
Storing and Recalling Station Presets
Automatically Store Stations
Preset Scan
Press TUNE nn or TUNE ll momentarily to seek the next strong station.
Press TUNE nn or TUNE ll for more than 2 seconds, then release. "MANUAL" will momentarily appear in the display. Press TUNE nn or TUNE ll momentarily to move radio frequency up or down one step at a time. Press and hold to advance quickly. If tuning is not adjusted for 5 seconds, the unit will return to seek tuning mode (default). "AUTO" will momentarily appear in the display.
Press SCAN to preview strong stations on the current band, pausing for 5 seconds at each. Press SCAN again to cancel.
Press LO/DX to activate local tuning for strong station reception only. Press LO/DX again to cancel and resume Distance tuning (default).
Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands.
Press and hold BAND then press TUNE nn to select European frequency spacing. Press and hold BAND then press TUNE ll to select USA frequency spacing (default).
Up to 18 FM stations and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button
2 seconds. When stored, the preset number will appear in the display. The station can be recalled anytime by pressing the corresponding preset button.
Note:
Function buttons 7, 8, 9 and 0 apply to MP3/WMA operation only.
Press AS/PS for more than 2 seconds to automatically store the six strongest stations in the current band. Automatic Local/Distance is activated during the initial band scan.
Press AS/PS for less than 2 seconds to scan presets
8