XD1228 OPERATION
General Operation
Setup Menu
Press and hold AUDIO/MENU for more than 3 seconds to access the setup menu, then press AUDIO/MENU to cycle through menu options. When desired option appears in the display, rotate the volume knob left/right to adjust or activate the desired function.
Menu Function | Options | Action | |
|
|
| |
| LOUD OFF | Disables the loudness function. | |
Loudness |
| Enables the loudness function. Activating this feature | |
Curve | LOUD ON | will enhance the bass and treble frequencies when | |
|
| listening to music at low volumes. | |
Tuner | FRE USA | Programs the unit to USA tuner spacing. | |
(200kHz for FM and 10kHz for AM). (Tuner mode only) | |||
Frequency |
| ||
| Programs the unit to European tuner spacing. | ||
Spacing | FRE EU | ||
|
| (50kHz for FM and 9kHz for AM). (Tuner mode only) | |
Local/Distance | LOC OFF | Activates distance tuning. | |
Tuning | LOC ON | Activates local tuning for strong station reception only. | |
| CLK ON | Programs unit to display the clock when the power is | |
Clock | off. | ||
| |||
Display | CLK OFF | Programs unit to not display the clock when the power | |
| is off. | ||
|
| ||
Beep | BEEP OFF | Disables the confirmation beep. | |
Confirmation | BEEP ON | Enables the confirmation beep. | |
Illumination | ILLU HI | Programs the LCD to the brightest illumination level. | |
Dimmer | ILLU LO | Lowers the LCD illumination level. |
USB Charging Port
Audio
Insert the USB connector of a battery powered USB device into the USB charging port on the front panel, which provides 5 volts DC and 1.0 amps. The USB device will immediately begin charging.
Note: The USB charging port may not be compatible with every device due to differences in power requirements.
Note: This USB port provides power only, and will not playback music from a USB device.
Press AUDIO to select between Volume (default), Bass, Treble, Balance, Fader and EQ.
VOLUME 
BASS
TREBLE 
BALANCE 
FADER 
EQ 
6