XD1215 OPERATION
Faceplate Removal
Power On/Off
Mode
Auxiliary Input
Bass Boost
Volume
Preset EQ Curves
Display
Set the Clock
General Operation
Press RELEASE and pull away from the left side to remove. To
Remove trim ring and install supplied #1 x 7/32” Phillips head screw through left side of mounting frame into faceplate.
Press PWR or any other button (except eject) to turn the unit on. Inserting a CD will turn the unit on automatically. Press PWR to turn the unit off.
Press MODE to select between tuner, CD player and auxiliary input. Modes of operation are indicated in the display.
Insert a standard 3.5mm connector into the AUX input (not included). Connect the other end to headphone or line output of audio device, MP3 player, etc. Press MODE to select AUX input mode.
Press BASS to activate and deactivate bass boost curve. Activating this feature will enhance the bass frequencies when listening to music at low volumes.
Adjust volume using VOL t or VOL s
Press EQ to select between CLASSIC, POP, ROCK and OFF (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).
Press DISP to display the clock. The radio frequency (tuner mode), CD elapsed time/track (CD player mode) or AUX (Auxiliary mode) show by default.
Press DISP to display the clock, then release. Press and hold DISP for 2 seconds, the clock will begin to flash. Press TUNE
<<to adjust the hours and TUNE >> to adjust the minutes. Clock settings will be saved after 5 seconds.
5