Dual XR4110 owner manual Wiring Diagram, Fuse

Page 3

XR4110 INSTALLATION

Wiring Diagram

Rear Preamp Output

Connect to amplifier RCA input

Antenna Connector

5 AMP

AGC Fuse

FUSE

When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XR4110 uses one 5 amp AGC fuse located in-line.

*Caution - Do not attach any speaker leads to ground as severe damage will occur.

3

Image 3
Contents XR4110 Getting Started Please read entire manual before installationPreparation Before You StartFuse Wiring DiagramControl Locations General Operation Tuner Operation Seek Tuning Manual Tuning BandUSB/SD Card Operation MP3 WMA Transfer Bit RatesFM Tuner AM Tuner General TroubleshootingSpecifications Problem Cause ActionLimited One Year Warranty What to do?Call us toll-free at Mail us at cs@dualav.com FCC Compliance Dual Electronics Corp Toll Free