HD Radio AM/FM Tuner Operation | Dual XHD6425 manual

XHD6425 OPERATION

HD Radio™ AM/FM Tuner Operation

Automatically Store Stations

Preset Scan

Band

Display

HD Seek Mode

Press AS/PS for more than two seconds to automatically store the six strongest stations in the current band. Automatic local tuning is activated during initial band scan.

Press AS/PS momentarily to scan presets 1-6 on the current band, pausing for five seconds at each. Press AS/PS again to cancel.

Press BAND to select FM1, FM2, FM3, AM1 or AM2.

When the unit is tuned to an analog station, press DISP to toggle the display between the following options:

FREQUENCY CLOCK

When the unit is tuned to an HD Radio station, press DISP to toggle the display between the following options:

FREQUENCY

STATION

PROGRAM

ARTIST

SONG

CLOCK

NAME

TYPE

TITLE

When information is unavailable, "NO DATA" appears in the display.

Press HD SEEK to activate digital-only tuning mode. The HD SEEK icon will appear on the display, indicating that the unit will skip over analog stations and tune to HD Radio stations only. Follow the instructions on page 9 to access seek, manual and scan tuning.

•Storing and Recalling Station Presets

HD Radio multicast stations (HD2 and HD3) can also be stored as presets. When a preset multicast station is recalled, "LINKING" appears in the display until the download process is complete (approximately 5 seconds).

Note: If the HD radio signal on the preset is unavailable, the unit reverts to the previous analog or digital station.

•Automatically Store Stations

While in HD SEEK mode, press AS/PS to automatically store HD Radio stations to presets 1-6. Multicast

channels (HD2 and/or) HD3 are not stored but can be accessed by pressing TUNE llfrom the HD1 station.