Dual XHD6425 Description Press Once. An will appear on the display, Then press a, Configurations

		XHD6425 OPERATION
	Bluetooth® Operation (Optional)
Function		Description
	Press	once. An "_" will appear on the display.
Making a Phone Call	Input the desired phone number using the 0-9, *, # buttons on the
	head unit front panel. Press to begin dialing.
	A phone call may also be placed from your mobile device using the
	keypad, phone book or speed dial.
	To enter last number dialing mode, press		, then press a
	second time. The head unit will display "Last Number Dialing."
	Press KEY 0 to cycle through the received, dialed or missed call
Last Number Dialing	categories. Rotate the rotary encoder to cycle through the last 5
	calls in the selected category. Note: You have 8 seconds to make a
	choice before the head unit returns to Bluetooth standby mode.
	Press	to begin dialing the selected number.
	If an incoming call is detected, the head unit will automatically
	switch to Bluetooth mode, muting any current audio.
	The incoming phone number will appear on the display, the phone
	icon will flash on the display, and a ring tone will be audible
Receiving a Phone	from the vehicle speakers. See Bluetooth Settings for speaker
	configurations.
Call
	NOTE: The ring audio level will depend the mobile device and head
	unit ring volume and audio settings. If the ringer on the mobile
	device is off, you may not hear an incoming ring tone.
	Press	on the head unit or BTM60 to receive a call. The phone
	icon will illuminate solid.
Refusing a Call	To refuse an incoming phone call, press and hold MUTE for 3
	seconds.
	The head unit will display the elapsed time of the phone call.
During a Phone Call	The rotary encoder will adjust the volume of the call.
	Press MUTE to select between microphone on (MIC ON) and
	microphone off (MIC OFF).
	To transfer the phone call between the head unit and the mobile
Audio Transfer	device, press and hold DISP for 3 seconds during a call. Tip:
	transfer audio to your mobile device before turning the head unit
	off.
Call Waiting	When a second call is incoming, press		to activate call waiting.
	The current call will be placed on hold, and the second call will be
	active. Press again to return to the first call.
	Hold MUTE for 3 or more seconds to end a call.
Ending a Phone Call	If the phone call was received, the head unit will return to previous
	mode when call is ended.
			23