IlluminiteTM Lighting Hook-Up Recommendations

XOBP12D INSTALLATION

IlluminiteTM Lighting Hook-Up Recommendations

Dual's patent-pending Illuminite bulb system and control circuitry provide for extraordinary blue illumination, allowing for creative color-coordinating installations. The interior of your vehicle will never sound or look ordinary again! Let your imagination take you there.

The lighting features of all Illuminite products require a 12V power source to operate. The speaker has two distinct sets of input terminals. The first is labeled audio input and the second is labeled Illuminite lighting inputs. The inputs are clearly marked with a label positioned directly above the terminal housing. The polarity (+ and -) indicators for each set of inputs also appear on these labels.

1.Do not connect your amplifier or any audio source to the Illuminite inputs. These inputs are designed for switched 12V DC power only. Do not connect directly to your battery permanently, as it will cause your battery to discharge. Please use a switched 12V source.

2.See Fig. 1a, (illustrated wiring diagram) to be sure to maintain polarity. Be sure to connect to a switched 12 volt source. Proper connection would be the positive (+) 12V wire to the positive (+) Illuminite input terminal and the negative (-) Illuminite input terminal to a solid chassis ground.

DO NOT CONNECT AMP OR ANY AUDIO SOURCE TO ILLUMINATION INPUTS. DAMAGE TO LIGHTS WILL OCCUR AND WARRANTY WILL BE VOID!

Fig 1a

Lighting Hook-Up From Rear

From Amplifier

Notice: The XOBP12D Illuminite lights are not removable. There are no serviceable parts inside or attached to the speaker assembly. The XOBP12D is considered to be a sensitive electronic device. Removal or tampering with any part or portion of the speaker and/or its assemblies will damage the product and void the warranty.