Preparation/Installation, Before You Start

DMP67 INSTALLATION

Preparation/Installation

Please read entire manual before installation.

Before You Start

•Disconnect negative battery terminal. Consult a qualified technician for instructions.

•Use extreme caution when drilling holes to avoid damaging fuel lines, hydraulic lines or existing wiring.

•If additional wiring is required, we recommend that you run all wires prior to mounting your speaker in place.

•Use the highest quality connectors for a reliable installation and to minimize signal and power loss.

•Use caution before you drill or cut! Be careful not to cut or drill into gas tanks, fuel lines, hydraulic lines, vacuum lines or electrical wiring.

•Avoid running wires over, near, or through sharp edged surfaces. We suggest you also use rubber grommets to protect any wires routed through metal.

Mounting and Installation

•Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure the mounting location is deep enough for the speaker to fit.

•Using an appropriate tool, cut a 5.13" diameter mounting hole.

•Remove grille from speaker by inserting the release key into the locking tab slots located at the top and bottom of the grille. Gently apply pressure towards the center of the grille to release the locking tabs.

•Use the speaker as a template to mark the locations for the mounting screws. Drill the mounting screw holes with a 1/8" pilot bit. Route speaker wires and connect to speakers, observing speaker polarity.

•Install speaker into opening using supplied hardware and test for correct operation.

•Align the speaker grille locking tabs and snap grille into place.

RELEASE KEY

TYPICAL MOUNTING

DMP67 specifications

The Dual DMP67 is a powerful and versatile digital media player that has carved out a niche for itself in the audio and media streaming landscape. Designed for audiophiles and casual listeners alike, it combines state-of-the-art technologies with user-friendly features to deliver an exceptional listening experience.

One of the standout features of the DMP67 is its high-resolution audio capabilities. It supports various audio formats, including WAV, FLAC, ALAC, and DSD, ensuring that users can enjoy their music in the highest quality possible. With a signal-to-noise ratio that exceeds industry standards, the DMP67 maintains the integrity of the audio signal, allowing for crystal-clear sound reproduction.

Connectivity is a key aspect of the DMP67. It boasts an array of input and output options, including USB, optical, and coaxial connections, as well as Bluetooth and Wi-Fi capabilities. This wide range of connectivity options enables users to stream music from their smartphones, tablets, and computers seamlessly. Additionally, the device is compatible with various streaming platforms such as Tidal and Qobuz, further enhancing its versatility.

The DMP67 employs advanced digital signal processing (DSP) technology to optimize playback, offering features like parametric equalization and digital crossover settings. Users can tailor their audio experience to suit their preferences, ensuring that every track sounds exactly as intended. Moreover, the intuitive user interface allows for easy navigation, providing quick access to playlists, favorites, and settings.

Build quality is another hallmark of the DMP67, featuring a sleek and modern design that fits impeccably into any home audio setup. Constructed with high-quality materials, it is designed to minimize vibrations and electromagnetic interference, protecting the integrity of the audio signal.

In summary, the Dual DMP67 stands out for its high-resolution audio support, versatile connectivity options, advanced DSP technology, and robust build quality. Whether you're a serious audiophile or a casual listener looking for outstanding sound quality, the DMP67 is equipped to meet and exceed expectations, making it a valuable addition to any audio system.