Bose LT 4402 LT 9402-III Loudspeaker Product Description, LT 9402-III Acoustical Specifications

Page 20

Acoustical Specifications and Wiring

LT 9402™-III Loudspeaker Product Description

The Bose® Panaray® LT 9402™-III loudspeaker is a mid/high-frequency device designed for medium throw distances. The LT 9402-III loudspeaker offers an 95˚ horizontal by 39˚ vertical dispersion pattern that allows you to cover a large seating area and direct energy away from reflective surfaces such as ceilings.

When arrayed correctly, LT 9402-III loudspeakers behave sonically as a large single source of sound energy. This Coherent Wavefront provides full fidelity and even-coverage at critical mid- and high-frequencies throughout the coverage area of the array.

Each PANARAY LT 9402-III loudspeaker uses two V2 mid-frequency drivers and a 1.4" com- pression driver mounted on a 90˚H x 40˚V constant directivity waveguide.

The LT 9402-III loudspeaker can be operated in passive or bi-amplified modes.

In passive mode, the internal passive crossover network is utilized and a single amplified signal is connected to the loudspeaker.

In bi-amplified mode, the mid-frequency and high-frequency drivers are accessed through

LT9402-III speaker with grille

separate pins on the Neutrik NL4 connectors.

 

Active equalization for the LT 9402 III loudspeaker an be provided by using the Panaray

LT 9402-III EQ card or the Panaray System controller with presets for each Panaray speaker and combination of speakers. A parametric equalizer can replicate the active equalization curve on the following page, along with a high-pass filter and low pass filter as shown.

LT 9402-III Acoustical Specifications

 

 

Passive

Bi-Amped

 

 

 

 

Mid

 

High

 

Power Handling1

140W

140W

 

75W

 

 

 

 

 

 

 

Impedance

8

8

 

8

 

 

 

 

 

 

 

Sensitivity2 (at 1W @ 1m)

106 dB SPL

106 dB SPL

 

106 dB SPL

 

Maximum SPL3

128 dB SPL

128 dB SPL

 

125 dB SPL

 

(pink noise @1m @ rated power)

 

 

 

 

 

 

 

 

 

 

 

 

LT9402-III speaker without grille

 

 

Mid Frequency

 

Recommended Crossover

 

HPF: 160 Hz, Butterworth, 4th order

 

 

 

Internal Crossover @ 1.6 kHz

LPF: 1600 Hz, Butterworth, 4th order

 

 

 

High Frequency

 

 

 

 

 

 

 

 

HPF: 1600 Hz, Butterworth, 4th order

 

 

 

 

LPF: 20 kHz, Butterworth, 4th order

 

 

Frequency Range4 (± 3 dB)

 

180 Hz - 16 kHz

 

 

 

 

 

 

 

 

Beamwidth

 

Horizontal: 95°, Vertical: 39°

 

 

(-6dB point, average 800 - 5 kHz)

 

 

 

 

 

 

 

 

 

 

 

 

 

LT9402-III speaker rear

How our loudspeakers are measured

1. Power Handling

Full bandwidth pink noise, meeting the IEC Standard #268-5, is applied to the loudspeaker and amplified to a level at the loudspeaker terminals corresponding to the power handling of the loudspeaker. The loudspeaker must show no visible damage or measurable loss of performance after 100 hours of continuous testing.

2. Sensitivity

Full bandwidth pink noise is applied to the loudspeaker with its active equalization curve and amplified to a level at the loudspeaker terminals corresponding to 1 watt as referenced to the nominal impedance. The average sound pressure level (dB-SPL) is measured at 1 meter from the speaker in an anechoic environment.

3. Maximum SPL

Full bandwidth pink noise is applied to the loudspeaker with its active equalization curve and amplified to a level at the loudspeaker terminals corresponding to the long-term rated power handling of the speaker. The average sound pressure level (dB-SPL) is mea- sured at 1 meter from the speaker in an anechoic environment.

4. Frequency Range

Sine waves are injected into the loudspeaker and the level is adjusted to 1 watt, as referenced to the nominal impedance, and the level measured at 1meter. Resulting graph is smoothed by 0.05 octave-band.

20

Image 20
Contents Bose Panaray LT Series III Loudspeakers Declaration of Conformity Declaration of ConformityContents Safety Information Read the instructionsMounting Guidelines How to Use This Reference Guide Mechanical Specifications LT 3202-III LoudspeakerLT 4402 -III Loudspeaker LT 9402-III Loudspeaker LT 9702-III Loudspeaker LT MB24-III Modular Bass Loudspeaker Internal Configurations Acoustical Specifications and WiringRecommended Wire Gauges Acoustical Specifications and Wiring To reconfigure your LT 3202-III loudspeaker only To reconfigure your LT MB24-III modular bass loudspeaker LT 3202-III Loudspeaker Product Description LT 3202-III Acoustical SpecificationsLT 3202-III Loudspeaker Configurations LT 3202-III Loudspeaker Active Equalization CurvesLT 4402-III Loudspeaker Product Description LT 4402-III Acoustical SpecificationsLT 4402-III Loudspeaker Configurations LT 4402-III Loudspeaker Active Equalization CurvesLT 9402-III Loudspeaker Product Description LT 9402-III Acoustical SpecificationsLT 9402-III Loudspeaker Configurations LT 9402-III Loudspeaker Active Equalization CurvesLT 9702-III Loudspeaker Product Description LT 9702-III Acoustical SpecificationsLT 9702-III Loudspeaker Configurations LT 9702-III Loudspeaker Active Equalization CurvesLT MB24 Loudspeaker Product Description LT MB24-III Acoustical SpecificationsLT MB24-III Loudspeaker Configurations LT MB24-III Loudspeaker Active Equalization CurveActive Equalization Other methods of providing active equalizationLT Series III Mid/High Loudspeakers LT MB24 Modular Bass LoudspeakerService Information Panaray LT Replacement PartsPainting Information Service Information Remove the replacement diaphragm from its carton Service Information To Replace the V-2 Mid-frequency Driver in the Panaray LT Service Information Service Information Driver and Electronics Assembly LT 3202-III LoudspeakerLT 4402-III Loudspeaker LT 9402TM-III Loudspeaker 10 11 12 13 14 15 24 23 22LT 9702-III Loudspeaker LT MB24-III Loudspeaker