SPECIFICATIONS
model | 200 | 500 |
RMS continuous power per channel, All channels | 35 | 75 |
driven into 4 ohms from 20 to 20,000 Hz, with less | watts | watts |
than 0.08% Total Harmonic Distortion @ 14.4 VDCC |
|
|
RMS continuous power per channel, All channels | 50 | 120 |
driven into 2 ohms from 20 to 20,000 Hz, with less | watts | watts |
than 0.1% Total Harmonic Distortion @ 14.4 VDC |
|
|
RMS continuous power, | 100x2 | 240x2 |
into 4 ohms from 20 to 20,000 Hz, with less than | watts | watts |
0.1% Total Harmonic Distortion @ 14.4 VDC
Dynamic power rating
Frequency Response
Damping Factor @ 4 ohm
Crossover
250600
watts watts
Greater than 95 dB
Greater than 200
Switchable high or low pass 12 dB/octave, continuously variable from 50 to 500Hz
Bass Equalization | +8 dB, centered at 40Hz | |
| (model 500 only) | |
Input Impedance | 20K ohms |
|
Input Sensitivity | Variable from 150 mV to 8 volt | |
Output Impedance | 2 to 8 ohms, stereo | |
| 4 to 8 ohms, bridged | |
Supply Voltage | 10 to 16 VDC |
|
Fusing and Power | 25A | 50A |
Cable Requirements (AWG) | #12 | #8 |
(Per amp, trunk mounted) |
|
|
8 | © 1999 Directed Electronics, Inc |