User's Guide T 30
Adjusting Your LCD Monitor - User Controls
Automatic Save OSD Lock/Unlock Volume Channel
1. Automatic Save
The monitor display becomes more stabilized if adjusted by Auto Adjustment functions when the monitor is installed for the first time. Try Auto Adjustment before attempting Manual Adjustment. Ensure the clock frequency of the monitor matches that of the computer video card before carrying out Auto Adjustment.
When the Auto button is pressed, the monitor screen turns black and the Auto Adjustment screen appears as shown in the animated screen on the left.
To make the automatic adjustment function sharper, execute the 'AUTO' function while the
AutoPattern.exe is on.
2. OSD Lock/Unlock
This function allows you to secure the current settings so that they cannot be inadvertently changed.
With the OSD screen off, push and hold the Menu button for at least 5 seconds to lock or unlock the controls.
The following functions are available even while the OSD menu is locked.
1.Control buttons Source button(PC, PIP , Video, Audio mode button), Volume button, Channel button, Menu button, Exit button, Auto button
2. PC Screen | Brightness, Contrast |
3. TV Screen | Channel, Volume |
With the OSD screen off, push and hold the Menu button for five or more seconds to unlock the OSD settings.
This function is activated by pressing the Menu button on the front panel of the monitor. (It is not available by pressing the Menu button on the remote controller.)
3. Volume
When OSD is not on the screen, push the VOL - 
/ VOL 
+ button to adjust volume.
1.Push the 
button to decrease the volume.
2.Push the 
button to increase the volume.