SYSTEM UTILITY
■To set auto play (Auto Play)
You can set the auto play function which automatically starts playback when the power of this unit is turned on.
1. Press MENU while this unit is in the stop mode.
2. Select “Sys. Utility” by rotating the MULTI JOG knob (pressing +/– on the remote control).
3. Press the MULTI JOG knob (ENTER on the remote control).
The display changes for the system utility item selection.
4. Select “Auto Play” by rotating the MULTI JOG knob (pressing +/– on the remote control).
A u t o P l a y
L
dB
R
5. The current setting is indicated on the display if the MULTI JOG knob (ENTER on the remote control) is pressed.
A u t o P l a y O f f
L
dB
R
Switch “Auto Play On” and “Auto Play Off” by rotating the MULTI JOG knob (pressing +/– on the remote control).
Note
•Initial setting is “Auto Play Off”.
6.Press the MULTI JOG knob (ENTER on the remote control) or COMPLETE.
The auto play function is set to on or off.
If the auto play function is set to on, the setting will be applied when the power of this unit is turned on the next time.
•This unit plays data on the drive that had been last selected when the power of this unit was last turned off.
•This unit plays in the playback mode (such as random play) that had been last set when the power of this unit was last turned off.
Note
•The setting for the timer recording takes precedence over the setting for the auto play function. If the timer recording is set, this unit starts recording when the power of this unit is turned on the next time even when “Auto Play On” is selected. See page 22 for the timer recording.
■To update the firmware version
(Firm. Update)
This menu is prepared for the expansion of the functions in the future.