Preparation |
|
| Attaching Neck straps |
| ① Put the string attached to |
| the strap through a Strap |
| bracket and let the strap |
| go through the loop as |
| shown. |
| ② After attaching a strap |
| to both brackets (right |
| and left) put the straps |
| together and adjust length |
Strap bracket | as shown. |
|
Warning battery status
When the battery is almost drained, the battery icon gives a warning signal by blinking
(
). (Replacing the battery at this point with a new one is recommended.) Then, before the battery is completely drained, the icon flashes
(
) and the power is automatically turned off. * When you do not use the camera for a long time, be sure to remove the battery from the camera in order to prevent battery drain.
Power switch button |
36
Turning on and off the power
Push the Power switch button to turn the camera on. WELCOME sign appears on the monitor.
Another push on the button turns power off.
Power will be cut when the power source button is depressed continuously while the power source button is turned on.
*When the camera is idle for longer than 60sec, power will automatically be turned off.
Mode shift button |
Shifting modes
Pushing Mode shift button will alternately shift the mode between Record and Playback.
*You cannot shift to Playback mode when no image is stored.
37