Installation |
| |
WIRING CONNECTIONS |
| |
Wiring Harness Socket |
| |
Wiring Harness & Plug | Antenna Receptacle | |
| ||
| Black: Ground | Antenna Cable & Plug |
|
| |
Blue/White: |
| |
5A | Yellow: Battery |
|
|
| RCA Line Out |
|
| Red = Right |
| Red: ACC Power | White = Left |
1A |
| |
|
| |
| Front Speaker Out (L) | Grey (+) |
| White (+) | |
|
| |
Left Front |
| Right Front |
|
| Grey / Black |
| White / Black |
|
Speaker Wiring Notes
Follow the above wiring diagram to install the head unit with new or existing speakers.
•This unit is designed for use with two
(2) speakers with an impedance be- tween 4 Ohms to 8 Ohms.
•An impedance load of less than 4 Ohms could damage the unit.
•Never bridge or combine the speaker wire outputs. When not using four speak- ers, use electrical tape to tape the ends of the unused speaker outputs to pre- vent a short circuit.
•Never ground the negative speaker terminals to chassis ground.
7