Step 8: Mount the foot and pipe
Secure the foot to its permanent location.
!DJUST THE END OF THE PIPE SO THAT IT IS perpendicular to the ground. Tighten the
HEX NUTS TO HOLD THE PIPE IN PLACE
End of the pipe should be perpendicular to the ground (plumb)
Step 9: Attach the antenna to the mast
IMPORTANT: Before you attach the antenna to your mast, visit www.antennaweb.org to see the locations of your local broadcast towers. This information is crucial in pointing your antenna correctly.
Loosen the nuts on the mounting clamp
Point the small end of the antenna toward the stations you want to receive.
Slide the
Point small end of antenna toward your local broadcast towers. Tighten the mast clamp and nuts securely.