B. Using the AC power Adapter
The included AC power adapter operates on AC between
•The supplied AC power adapter is suitable for use on AC mains supplies of
DVD Player A | DVD Player B |
To AC | To AC |
2 wall outlet | 2 wall outlet |
AC | AC |
adapter | adapter |
Connections
Playing one DVD on both DVD Player A and B
You can watch the same DVD simultaneously on player A and B. DVD Player A | DVD Player B |
Watching same DVD on both Players
1. Connect the DVD Player A and B using the included Audio/ Video cable.
2. Turn on both units. Slide the DVD/AV IN switch on unit A to "AV IN" and place a disc on it.
3. Play the DVD - unit B will display the DVD at the same time.
1 To DC IN | 1 To DC IN |
Cautions:
•Turn off the unit before unplugging the AC power adapter to avoid damage to the unit.
•When the unit is not going to be used for a long time, disconnect the AC power adapter from the AC outlet.
•The AC power adapter included with this unit is for its use only. Do not use it with other equipment.
IMPORTANT
•Be sure to use the unit close to the wall outlet and make it is easily accessible. If a malfunction occurs, disconnect the plug from the wall outlet at once.
•When the AC power adapter is plugged in, the apparatus is not completely disconnected from the main power source, even when the unit is turned off.
Connecting to a TV
If your TV has Audio/Video inputs, you can connect the DVD Players to your TV using the included Audio/Video cable.
Watching a DVD on your TV
1.Connect your TV to the DVD players using the included Audio/Video cable.
2.Turn on the DVD players. Slide the DVD/AV IN switch on DVD Player A to "DVD".
3.Turn on the TV and follow the instructions included with the TV for display of content from other sources.
Note:
•Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal.
DVD Player A
DVD Player B
Connecting to Game Systems/Video Equipments (For DVD Player A only)
You can connect game system or other video equipments for playback.
Watching video equipment
1. Connect the video equipment with the DVD Player A using
the included Audio/Video cable.DVD Player A
2. Turn on the Player. Slide the DVD/AV IN switch to "AV IN".
3. Turn on the video equipment and follow the instructions provided with it to playback.
Note:
• Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal.
• If you have a mono VCR, the volume level from the speakers will be low.
Game System/
Video
Equipment
6 | 7 |