Playing Discs - Basic Functions
Compatible discs
•DVD,
•CD,
Compatible formats
• DVD, JPEG, CD
Regional coding
Your unit has been designed to process regional management information stored on DVD discs. The regional code for your unit is 1. Discs that have a different regional code will not be played.
Basic playback operations
Playback
1.Slide the STANDBY/ON switch to the ON position. Slide the DVD / AV IN switch on unit to DVD.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 2.
2.Press the 
button and hold the front panel to open the disc door.
3.Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front, until you hear a “click”.
4.Push the disc door gently to close it. It takes a short while for your unit to load the disc.
After loading, for most DVDs, the unit will automatically take you main menu or start playing. If the unit does not automatically start playing the DVD, press the 
PLAY button.
Pausing playback (still mode)
Press the 
PAUSE button. To resume normal playback, press the 
PLAY button. Each time you press the 
PAUSE button, the picture advances one frame (DVD).
Stopping playback
Press the 
STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the 
PLAY button.
If you press the 
STOP button twice, the unit’s memory will be cleared and pressing the 
PLAY button will reset the DVD to the beginning.
Skipping to a different track
•Press the 
PREV button to go back to previous titles/chapters/tracks.
•Press the 
NEXT button to advance titles/ chapters/tracks.
•For an audio CD, use the number buttons on the remote control to go directly to the desired
track number. | EN |
|
Audio selection (DVD)
On some discs, the sound is recorded in two or more formats. Follow the directions below to select the type of playback.
1.While a disc is playing, press the AUDIO button to show the current audio format number.
2.Press the AUDIO button repeatedly to select the desired audio format.
Note:
• If only one audio format is 
recorded, the number does not change.
•About two seconds later, playback continues in the new audio format.
Subtitle selection (DVD)
1.While a DVD is playing, press the SUBTITLE button to display the current language setting.
2.Press the SUBTITLE button repeatedly to select the desired subtitle language.
Note:
• If only one language is recorded, the language does not change.
•About two seconds later, playback continues with the new subtitle selected.
•The number of languages recorded differs depending on the disc.
•If no button is pressed within a few seconds, playback continues without changing the current subtitle.
•This function can only be used for discs on which subtitles have been recorded in multiple languages.
•On some DVDs, subtitles are activated from the main menu of the DVD. Press the MENU button to activate the main menu.
13