Connecting to Power & Multi Channel AV Control Unit System
3. Connecting to Multi Channel AV Control Unit System
The Illustration below is just possible examples with our Multi Channel AV Control Unit System only. The exact connection method will vary depending on the specific components selected for a particular installation.
Please also refer to the owner s and installation manuals supplied with the associated equipment.
Don’t use both AV2 and DVD/ VCD Changer Input at the same time because it is linked each other. It can be used either only for AV2 or only for DVD/ VCD Changer Input.
NOTICE
Make sure that power is off before making signal connections.
Connect this Unit
In Case of Using Sub woofer, you must use additional Power Amplifier with Sub woofer Line out.
WARNING
Do not use the Digital Audio Output of this Unit unless you are connecting it to a suitable Dolby Digital and/or DTS decoder or to an amplifier equipped with a digital audio input. High volume digital signals may damage your equipment and your hearing.
14