Radio Operation, Cassette Operation | PYLE Audio PLCDCS220MP

OPERATION

RADIO OPERATION

•SWITCHING TO RADIO MODE Press MODE button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency.

•SELECTING THE FREQUENCY BAND

At radio mode, press BAND/LOUD (ENTER) button (13) shortly to select the desired band.

The reception band will change in the

following order:

FM1FM2FM3AM

•SELECTING STATION

Press TUNE/TRACK/SKIP button

(17)or TUNE/TRACK/SKIP button

(16)shortly to activate automatic seek function. Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and “AUTO” appears on the display.

•LOCAL/DISTANT

Press LOC button (1) to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is effect during AUTO SEEK operation.

•AUTOMATIC MEMORY

STORING & PROGRAM SCANNING - Automatic Memory Storing

Press AMS/D-AUDbutton (14) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.

- Program Scanning

Press AMS/D-AUDbutton (14) shortly to scan preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with release mute, then searches again.

•STATION STORING

Press any one of the preset buttons (18) (1 to 6) to select a station which had been stored in the memory.

Press this button for several seconds (until 2ND beeps come out), current station is stored into the number button.

•MONO/STEREO

Press MO/ST button (8) to select mono or stereo mode. You can sometimes improve reception of distant stations by selecting mono operation.

•SCAN

Press SCAN button (3) to set the function to scan mode, which scanning to higher frequency station with receivable signal and keep on each station for several seconds.

CASSETTE OPERATION

•SWITCHING TO TAPE MODE If there is no tape inserted in the cassette compartment:

Press OPEN button (7) to fold down the front panel and show the cassette compartment (26). Then insert the tape into the compartment. The cassette mechanism will load it in play mode.

If a tape is already inserted in the cassette compartment:

Keep pressing MODE button (6) shortly until the tape mode display appears.

•PROGRAM BUTTON

These two buttons (25) perform the dual functions of changing the direction of tape playback and fast forward/rewind of the tape.

-Change Tape Playback Direction Press both buttons together to play the other side of a tape.

-Fast Forward/Rewind

Press the button with the double arrows pointing the same direction as the direction indicator in the LCD to fast forward; press other button in the opposite direction to fast rewind.

•EJECT

When the front panel is folded down, push the eject () button (24) down to eject the cassette tape.