26.VOL+: Volume up the monitor
27.
28.MUTE: Shut the sound OFF
29.MENU: Enter monitor OSD Menu
30.EXIT: Exit OSD menu select
31.FORMAT: Switch NTSC/PAL
32.
33.C.C (Option): Close caption
34.CH+: Adjust channel up
35.
Appendix
Changing the New Battery in Remote Control
1.Push the battery case button to wards the right. (As shown # 1 in below figure)
2.Pull the battery case away from the remote control.
(As shown # 2 in below figure) Change a new battery.
2 Battery
Cassette Button
1 
Using the Remote Control
1.Point the remote control towards the IR sensor in front of the monitor housing. 2.Operation angle: IR remote control will work about 30 degree in each direction from the IR sensor of the monitor housing.
+- 30 Degree
《11》
FM MODULATOR SECTION
Press cable button that if you are using FM Modulation to provide audio signal from the tuner to you car radio, applying the unite function will also mute the audio portion of the signal delivered by the transmitter but not the tuner's output carrier signal providing A/V audio to your car radio.
Transmitting audio to your car radio
This tuner system is able to transmit the audio signal to your car radio in the FM Radio spectrum. By tuning your radio to a corresponding channel, you can listen to the audio from your program source. This function is particularly important when installing in car whose radio lacks AUX line level inputs.
To use this system turn your car radio from
FM@87.7Mhz, 87.9@Mhz, 88.3@Mhz, and 88.7@Mhz . for 4 channels. You shall be able to hear your AV audio broadcast through your car radio system.
SELECT FM CHANNEL
POWER LED
FM CHANNEL LED (4 channel select)
Press "SELECT" button to switch
FM channels & POWER.
《12》