GENERAL OPERATION
TURNING THE UNIT ON/OFF Turning on the Player
After all connections are completed correctly, Press 
power button on the front panel to turn on the power. When the unit is on, it will search the disc automatically. If there is a disc in the disc slot, the unit will start playback automatically.
Turning off the Player
When the power is on press 
power button on the front panel or on the remote control to turn off the power.
AV output Type Selection
Slide AV OUTPUT TYPE switch on the back of the unit left or right to select A or B.
When the switch is slid to A side, the AV OUTPUT 1 and AV OUTPUT 2 are both under the control of the MODE button on the remote control or on the front panel of the unit, i.e. the signal output may be any one of the DVD, AV INPUT 1 and AV INPUT 2 signal source.
When the switch is slid to B side, the AV OUTPUT 1 just outputs the AV INPUT 1 signal and it doesn’t under the control of the MODE button or SOURCE button.
But the signal output from the AV OUTPUT 2 is under the control of the MODE button on the remote control or on the front panel of the unit.
Remote Sensor (IR)
Point the remote handset to the remote sensor IR on the DVD unit. Receive the signal from remote handset.
Loading a Disc
Insert the disc into the disc slot with the printed side facing up, the player will play the disc automatically.
Removing a Disc
When the disc stops playing, press 
eject button on the front panel to eject the disc.
BASIC PLAY
Stopping Playback
-Shortly press 
button on the front panel or on the remote control one time to 
/ 
button on the front panel or on the remote control is pressed, normal
playback will continue.
-Press 
button twice to stop the playback and go back to the DVD LOGO.
Pausing Play/Step Play
Pressing 
on the front panel or 
on the remote control during playback will stop playback temporarily. To return to normal playback, press
on the remote control or 
on the front panel.
If you play a DVD/VCD/SVCD, press 
on the remote control again to stop at the next picture (step function). If you play a CD/MP3/Picture CD, pressing 
on the remote control again is ineffective.
Rapid Forward / Rapid Reverse Press 
& 
during playback. Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follows.
DVD/VCD/CD/MP3:
Normal Playback
X2
X4
X8 
X20
Slow Motion Playback (For DVD Only) Press 
/ 
during play.
Each time the button is pressed, the speed of slow forward/reverse changes according to the disc as follows.
DVD:
Normal Playback 
SF1/2
SF1/3
SF1/4 
SF1/7 
SF1/6
SF1/5
In slow motion state, press
on the remote control to recover normal playback.
Skipping Track
Press 
/ 
buttons on the remote control or on the front panel during playback.
Press 
to skip to the next track, and press 
to skip to the previous track.
Note:
For some VCD2.0 discs 
/ 
buttons may be unavailable.
Volume Level Adjustment
Rotating VOL+/- button on the DVD unit or VOLUME +/- on the remote control to increase or decrease the volume level.
11