ADVANCED OPERATION
The meaning of the menu is the same with the DVD menu above.
PAL/NTSC SYSTEM SELECTION Press the P/N button to switch between PAL, NTSC and AUTO three modes. Note: The function is only effective when the LOGO is shown. That is to say, when no disc in, ejecting a disc and in stop mode or
RANDOM PLAYING
Pressing SHUFFLE button during playback will start to play tracks in random order. Press the button again to revert to normal playback.
Note:
•When playing a VCD/SVCD, the random playback is effective with PBC OFF.
GOTO FUNCTION
FOR DVD:
Press GOTO button, the screen will display the following message:
Use the number keys to input the desired Title, Chapter or Time, then press OK key to confirm.
FOR VCD (WITH PBC OFF)/CD:
You can input the Track and Time then press ENTER key to confirm.
ZOOM FUNCTION
Allows the picture to be increased in size. Press ZOOM button on the remote control to toggle among 2 scale, 3 scale and 4 scale, 1/2 scale,1/3 scale, 1/4 scale. When the sale is 1/4 times, press ZOOM button again to cancel the zoom function.
ZOOM 2 
ZOOM 3
ZOOM 4 
ZOOM 1/2
ZOOM OFF 
ZOOM 1/4 
ZOOM 1/3 
During Zoom mode, press 
/ 
, 
/ 
buttons to move pictures up, down, left, or right direction.
SPECIAL FUNCTIONS FOR DVD Multi-subtitle Language Function
Press
: OFF
Each time the button is pressed, the subtitle language changes in sequential order.
Notes:
-The language number is different according to the disc.
-Some discs only contain one subtitle language.
Multi-audio Language Function
Press AUDIO during playback. The following information will be shown on the screen.
: [1 JAPAN] Each time the button is pressed, the audio soundtrack language changes in sequential order.
Notes:
-The language number is different according to the disc.
-Some discs only contain one soundtrack language.
Press ANGLE during playback. The following information will be shown on the screen.
ANGLE 1
[ 1/3]
Each time the button is pressed, the angle changes in sequential order. Notes:
-The angle number is different according to the disc.
-The function only works for discs having scenes recorded at different angles.
FREQUENTLY ASKED QUESTIONS
•When inserting a DVD disc, why it can’t be played, just showing “region error”? It is because that the DVD player and the discs all have the “REGION CODE”. If the region number described on the DVD disc does not correspond to the region number of this DVD player, the unit cannot play the disc.
•When inserting a DVD disc, there is a window shown on the screen that
14